John Drummond DRUMTL10 Voltage Indicator CAT III 1000 V, CAT IV 600 V

Technical data sheets
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): PH
Product Details

Drummond Test Lamps MTL10

Bright LED indication of voltage between 50V and 500V AC/DC
Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight
Identifies potentially lethal voltages at 50V and distinguishes between 110V, 230V and phase to phase voltages in 3 phase systems
Finger shields and insulated probe tips with only 4mm of exposed metal
Double insulated cable with white inner insulation gives a clear warning of abrasion and is heat and oil resistant
Meets the recommendations of the UK Health and Safety Executive in their guidance notes on the electrician’s test lamp (GS38)
Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V
No batteries required

Caution

Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit.

Supplied with

Carry case, right angled probe tip, two straight tips and instructions

Caution

Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit

Mains Voltage Indicators - Contact

Specifications
Attribute Value
Maximum Voltage 500V ac/dc
Safety Category CAT III 1000 V, CAT IV 600 V
Display Type LED
IP Rating IP67
Power Source Mains
Dimensions 213 x 112 x 72mm
Weight 320g
Height 72mm
Length 213mm
Maximum Operating Temperature +55°C
Minimum Operating Temperature -10°C
Safety Category Level CAT III, CAT IV
Safety Category Voltage 600 V, 1000 V
Width 112mm
Model Number p DRUMTL10
40 In stock for delivery within 3 working days
Price Each
SGD 130.03
(exc. GST)
SGD 139.13
(inc. GST)
units
Per unit
1 +
SGD130.03
Related Products
The Non-Contact VoltStick® is a tester for safely ...
Description:
The Non-Contact VoltStick® is a tester for safely checking the presence of an AC voltage without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes etc. No current flow is needed for correct detection. Apply the plastic ...
The FLIR VP50 is a tough Non-Contact Voltage ...
Description:
The FLIR VP50 is a tough Non-Contact Voltage Detector featuring a combination of alerts – including tactile vibration, red LED alarms, and a powerful LED worklight— so you’ll never miss the presence of voltage even in dark or noisy areas. ...
The Megger VF3 voltage detector resembles a small ...
Description:
The Megger VF3 voltage detector resembles a small pen like instrument. It is used to identify the presence of live AC voltages of socket outlets, switches, circuit breakers, fuses, luminaries, wires and cables ranging from 60V to 90V at 50Hz ...
RS Pro IVT20 two-pole voltage and continuity tester ...
Description:
RS Pro IVT20 two-pole voltage and continuity tester are rugged and easy to use. 2 pole test with 2000 Count digital displayAuto Sensing of ACV, DCV, Ω, Continuity and DiodeIntegrated single pole test for phase detectionRotary field indicationDual display for ...