Monitran Vibration Sensor 20 mA -25°C → +90°C, Dimensions 27 x 43 mm

  • RS Stock No. 533-2374
  • Mfr. Part No. MTN/1185CQ-25
  • Manufacturer Monitran
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

MTN1185 Series 4-20mA Accelerometer

Used for air handling units, building services, fans
4-20mA output for PLC interface
Output proportional to RMS velocity (mm/s)
Available with 0-10mm/s (533-2368) or 0-25mm/s (533-2374) velocity ranges
Frequency from 2 Hz to 1 kHz
Dynamic range: 50 g peak
5 meter armoured PTFE cable
IP 67 Stainless Steel body Case
To use with Glue or M8 Mounting stud
Dimensions (DxL): 27 x 43 mm

Accelerometers

Vibration sensors use solid-state piezoelectric accelerometers to detect the level of vibration in rotating elements like bearings and gearboxes on machinery such as motors, generators, pumps, fans and compressors. Regular vibration measurements on all critical machines as part of the maintenance regime can detect early signs of failure and provide a way to eliminate these problems. Bearing wear, poor balance and loose mounting all lead to the failure of rotating machinery. Unexpected machinery failure leads to unplanned maintenance costs, loss of production plus potential Health and Safety hazards. They are rugged, adaptable to all types of machinery and conditions including operation in hazardous areas, easy to install and require no maintenance. Used in conjunction with off- and on-line vibration analysers they yield valuable diagnostic information on the machinery's condition and reveal where and when failure may occur allowing pre-emptive maintenance intervention. The dc (velocity) outputs integrate this complex signal into a simple dc signal of 4-20mA proportional to the overall vibration of the machine, ideal for monitoring with all types of industrial controllers.

Specifications
Attribute Value
Maximum Current 20 mA
Length 27mm
Width 27mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +90°C
Dimensions 27 x 43 mm
17 In stock for delivery within 3 working days
Price Each
SGD 338.46
(exc. GST)
SGD 362.15
(inc. GST)
units
Per unit
1 - 5
SGD338.46
6 +
SGD328.84
Related Products
Switching distance 10 mm (nb) for Ø 20 ...
Description:
Switching distance 10 mm (nb) for Ø 20 mm typeSwitching distance 20 mm (nb) for Ø 34 mm typeAC / DC types for direct and alternating voltageN/O / N/C output function programmable for AC / DC typesCable outlet can be ...
Hinged M12 connector (rotates through 90°)Lens and back ...
Description:
Hinged M12 connector (rotates through 90°)Lens and back plate interchangeable for vertical or horizontal mountingLight or dark switching operation selectableLED indication of status and alignment53 x 30.4 x 99.3mm (H x W x D).
The highly versatile AMM20B Series non-contacting multi-turn rotary ...
Description:
The highly versatile AMM20B Series non-contacting multi-turn rotary position sensor has a 12-bit resolution, a rotational life of up to 50 million cycles and a factory programmable electrical angle from 1080 to 3600 degrees. Designed to meet the specifications of ...
Efector 800 range of Vibration Sensors. Vibration monitor ...
Description:
Efector 800 range of Vibration Sensors. Vibration monitor VKConnection via M12 connectorVibration monitor Vrms to DIN ISO 10816Switching outputs:1 x normally closed DC PNP and 1 x analogue 4 → 20 mASwitching status LED (yellow)Power LED (green)Non latching short circuit ...