Monitran Vibration Sensor 20 mA -25°C → +90°C, Dimensions 27 x 43 mm

  • RS Stock No. 533-2368
  • Mfr. Part No. MTN/1185CQ-10
  • Manufacturer Monitran
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

MTN1185 Series 4-20mA Accelerometer

Used for air handling units, building services, fans
4-20mA output for PLC interface
Output proportional to RMS velocity (mm/s)
Available with 0-10mm/s (533-2368) or 0-25mm/s (533-2374) velocity ranges
Frequency from 2 Hz to 1 kHz
Dynamic range: 50 g peak
5 meter armoured PTFE cable
IP 67 Stainless Steel body Case
To use with Glue or M8 Mounting stud
Dimensions (DxL): 27 x 43 mm

Approvals

EEx ia lic BAS02ATEX1057/3

Accelerometers

Vibration sensors use solid-state piezoelectric accelerometers to detect the level of vibration in rotating elements like bearings and gearboxes on machinery such as motors, generators, pumps, fans and compressors. Regular vibration measurements on all critical machines as part of the maintenance regime can detect early signs of failure and provide a way to eliminate these problems. Bearing wear, poor balance and loose mounting all lead to the failure of rotating machinery. Unexpected machinery failure leads to unplanned maintenance costs, loss of production plus potential Health and Safety hazards. They are rugged, adaptable to all types of machinery and conditions including operation in hazardous areas, easy to install and require no maintenance. Used in conjunction with off- and on-line vibration analysers they yield valuable diagnostic information on the machinery's condition and reveal where and when failure may occur allowing pre-emptive maintenance intervention. The dc (velocity) outputs integrate this complex signal into a simple dc signal of 4-20mA proportional to the overall vibration of the machine, ideal for monitoring with all types of industrial controllers.

Specifications
Attribute Value
Maximum Current 20 mA
Length 27mm
Width 27mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +90°C
Dimensions 27 x 43 mm
15 In stock for delivery within 3 working days
Price Each
SGD 402.68
(exc. GST)
SGD 430.87
(inc. GST)
units
Per unit
1 - 5
SGD402.68
6 +
SGD390.62
Related Products
Stainless steel smooth body with PBT sensing face. ...
Description:
Stainless steel smooth body with PBT sensing face. Ideal for applications where contamination may be a problem. LED indication Embeddable IP67 Operating temperature range -25 → +70°C EN60947-5-2 Short circuit and reverse polarity protection.
A range of inductive cylindrical sensors that are ...
Description:
A range of inductive cylindrical sensors that are ATEX approved so can be used in hazardous areas and potentially explosive atmospheres. ATEX approved, suitable for hazardous areasShielded or unshielded versionsHousing material: nickel plated brass or stainless steel.
Introducing RS PRO pressure sensors, also known as ...
Description:
Introducing RS PRO pressure sensors, also known as pressure transmitters. These devices change pressure forces into electrical signals. They are used to measure the pressure of the specific quantity like air, water and gas by changing the pressure into electrical ...
Ifm electronic VTV series vibration transmitters monitor machinery ...
Description:
Ifm electronic VTV series vibration transmitters monitor machinery and equipment according to ISO 10816. The robust design, high IP Rating and high temperature rating are suitable for use in harsh environments. The VTV sensors measure the true RMS velocity of ...