Monitran Mounting Adaptor

  • RS Stock No. 533-2267
  • Mfr. Part No. MTN/MS001
  • Manufacturer Monitran
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

MTN/1800 Model Analysis

R&D, PCB testing, Model analysis
1000mV/g +/-5%
Frequency from 5Hz to 12 KHz
+/-10 G Dynamic acceleration range
Bias voltage nominal 12Vdc
Connection via BNC plug
IP65 sealing
Mounting via bond with beeswax or adhesive
Dimensions (L x W x H): 14x14x14mm

Approvals

EEx ia lic BAS02ATEX1057/3

Accelerometers

Vibration sensors use solid-state piezoelectric accelerometers to detect the level of vibration in rotating elements like bearings and gearboxes on machinery such as motors, generators, pumps, fans and compressors. Regular vibration measurements on all critical machines as part of the maintenance regime can detect early signs of failure and provide a way to eliminate these problems. Bearing wear, poor balance and loose mounting all lead to the failure of rotating machinery. Unexpected machinery failure leads to unplanned maintenance costs, loss of production plus potential Health and Safety hazards. They are rugged, adaptable to all types of machinery and conditions including operation in hazardous areas, easy to install and require no maintenance. Used in conjunction with off- and on-line vibration analysers they yield valuable diagnostic information on the machinery's condition and reveal where and when failure may occur allowing pre-emptive maintenance intervention. The dc (velocity) outputs integrate this complex signal into a simple dc signal of 4-20mA proportional to the overall vibration of the machine, ideal for monitoring with all types of industrial controllers.

42 In stock for delivery within 3 working days
Price Each
SGD 14.38
(exc. GST)
SGD 15.39
(inc. GST)
units
Per unit
1 - 9
SGD14.38
10 - 49
SGD14.28
50 +
SGD14.18
Related Products
TE Connectivity’s MEAS piezoelectric film sensors are constructed ...
Description:
TE Connectivity’s MEAS piezoelectric film sensors are constructed from silver ink screen printed electrodes on rectangular piezo film. Piezo vibration sensors without a lead can be adhered directly to a surface using epoxy resin or double sided tape, and leads ...
The range of shock sensors from Murata are ...
Description:
The range of shock sensors from Murata are designed for high performance acceleration sensors for vibration and mechanical shock. They are designed for a wide range of applications including; consumer equipment, healthcare, security, tyre pressure monitoring and industrial automation.
Normally open contact acceleration switches used to detect ...
Description:
Normally open contact acceleration switches used to detect sudden changes in velocitySteel gold plated caseChoice of activation levels: 2G (455-3665), 5G (289-7935), 10G (455-3643)Dimensions: Length 18mm (inc. pins) Body Dia. 4.6mm.
Vibration sensors use solid-state piezoelectric accelerometers to detect ...
Description:
Vibration sensors use solid-state piezoelectric accelerometers to detect the level of vibration in rotating elements like bearings and gearboxes on machinery such as motors, generators, pumps, fans and compressors. Regular vibration measurements on all critical machines as part of the ...