Monitran Vibration Sensor 8 mA -55°C → +140°C, Dimensions 22 x 48 mm

  • RS Stock No. 533-2251
  • Mfr. Part No. MTN/1100CQ
  • Manufacturer Monitran
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

MTN/1100 Series General Purpose

Used for Data-collector, heavy industry, paper machinery
100mV/g +/-10% Nominal at 80Hz
Frequency from 2Hz up to 10KHz
+/-80G Dynamic acceleration range
Bias Voltage nominal 12 Vdc
Available with TNC Connection (533-2239) or integral cable (533-2251)
IP 67 Stainless Steel body Case
533-2251 includes a 5 meter PTFE Cable - stainless steel over braided
Mounting torque: 8Nm
To use with Glue or M8 Mounting stud
Dimensions (D x L): 22x48mm

Approvals

EEx ia lic BAS02ATEX1057/3

Accelerometers

Vibration sensors use solid-state piezoelectric accelerometers to detect the level of vibration in rotating elements like bearings and gearboxes on machinery such as motors, generators, pumps, fans and compressors. Regular vibration measurements on all critical machines as part of the maintenance regime can detect early signs of failure and provide a way to eliminate these problems. Bearing wear, poor balance and loose mounting all lead to the failure of rotating machinery. Unexpected machinery failure leads to unplanned maintenance costs, loss of production plus potential Health and Safety hazards. They are rugged, adaptable to all types of machinery and conditions including operation in hazardous areas, easy to install and require no maintenance. Used in conjunction with off- and on-line vibration analysers they yield valuable diagnostic information on the machinery's condition and reveal where and when failure may occur allowing pre-emptive maintenance intervention. The dc (velocity) outputs integrate this complex signal into a simple dc signal of 4-20mA proportional to the overall vibration of the machine, ideal for monitoring with all types of industrial controllers.

Specifications
Attribute Value
Maximum Current 8 mA
Minimum Operating Temperature -55°C
Maximum Operating Temperature +140°C
Dimensions 22 x 48 mm
3 In stock for delivery within 3 working days
Price Each
SGD 411.47
(exc. GST)
SGD 440.27
(inc. GST)
units
Per unit
1 - 5
SGD411.47
6 +
SGD399.15
Related Products
The Turck Banner range of Glass Fibre Optics ...
Description:
The Turck Banner range of Glass Fibre Optics are designed to solve challenging sensing applications even in the most hostile environments and can withstand severe shock or vibrations.This range of fibre optics are constructed from a combination of stainless steel, ...
Fully adjustable low pressure switches suitable for a ...
Description:
Fully adjustable low pressure switches suitable for a wide range of industrial usesNylon 12 housing, neoprene diaphragm, stainless steel spring5 fixing holes on 28.5 pcd for No. 4 self-tapping screws.
Celduc PTA/PDC series M10 magnetic proximity sensors are ...
Description:
Celduc PTA/PDC series M10 magnetic proximity sensors are an extremely small package size. Featuring a normally open contact in a stainless steel housing. The PTA/PDC series comes pre cabled with a 2 wire 2 m length cable.
Ifm electronic VTV series vibration transmitters monitor machinery ...
Description:
Ifm electronic VTV series vibration transmitters monitor machinery and equipment according to ISO 10816. The robust design, high IP Rating and high temperature rating are suitable for use in harsh environments. The VTV sensors measure the true RMS velocity of ...