Monitran Vibration Sensor 8 mA -55°C → +120°C, Dimensions 22 x 48 mm

  • RS Stock No. 533-2239
  • Mfr. Part No. MTN/1100
  • Manufacturer Monitran
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

MTN/1100 Series General Purpose

Used for Data-collector, heavy industry, paper machinery
100mV/g +/-10% Nominal at 80Hz
Frequency from 2Hz up to 10KHz
+/-80G Dynamic acceleration range
Bias Voltage nominal 12 Vdc
Available with TNC Connection (533-2239) or integral cable (533-2251)
IP 67 Stainless Steel body Case
533-2251 includes a 5 meter PTFE Cable - stainless steel over braided
Mounting torque: 8Nm
To use with Glue or M8 Mounting stud
Dimensions (D x L): 22x48mm


EEx ia lic BAS02ATEX1057/3


Vibration sensors use solid-state piezoelectric accelerometers to detect the level of vibration in rotating elements like bearings and gearboxes on machinery such as motors, generators, pumps, fans and compressors. Regular vibration measurements on all critical machines as part of the maintenance regime can detect early signs of failure and provide a way to eliminate these problems. Bearing wear, poor balance and loose mounting all lead to the failure of rotating machinery. Unexpected machinery failure leads to unplanned maintenance costs, loss of production plus potential Health and Safety hazards. They are rugged, adaptable to all types of machinery and conditions including operation in hazardous areas, easy to install and require no maintenance. Used in conjunction with off- and on-line vibration analysers they yield valuable diagnostic information on the machinery's condition and reveal where and when failure may occur allowing pre-emptive maintenance intervention. The dc (velocity) outputs integrate this complex signal into a simple dc signal of 4-20mA proportional to the overall vibration of the machine, ideal for monitoring with all types of industrial controllers.

Attribute Value
Maximum Current 8 mA
Minimum Operating Temperature -55°C
Maximum Operating Temperature +120°C
Dimensions 22 x 48 mm
4 In stock for delivery within 3 working days
Price Each
SGD 423.49
(exc. GST)
SGD 453.13
(inc. GST)
Per unit
1 - 5
6 +
Related Products
Stainless steel and PA12 plastic construction protected to ...
Stainless steel and PA12 plastic construction protected to IP67 Inserted directly into cylinder’s dovetail, fixed with a single stainless steel clamping screw Overload, short circuit and reverse polarity protection LED Status Display.
From RS PRO, comes a range of high ...
From RS PRO, comes a range of high quality and great value PT100 and PT1000 PRT (Platinum resistance thermometer) probe. Manufactured to industry standards, this high-temperature stainless steel probe is an excellent solution for temperature measurement.
Sick TBS series temperature sensors are designed for ...
Sick TBS series temperature sensors are designed for temperature measurement and monitoring of operating liquids, such as hydraulic oils, coolant lubricants and cleaning liquids in machine building and manufacturing. With two binary PNP outputs and one analogue output, it can ...
Working temperature from -50 °C → +600 °CFlexible, ...
Working temperature from -50 °C → +600 °CFlexible, thin-walled sheathed wire made of stainless steel; the low-ohm copper internal conducting wires are embedded in compressed, fire-resistant magnesium oxide for vibration resistanceTwo or three-conductor circuitRapid response timesConnection lead made of silicon, ...