FTDI Chip FT602Q-T, USB Bridge IC, USB 2.0, USB 3.0 2-Port at 480 (USB 2.0) Mbit/s, 5 (USB 3.0) Gbit/s, 3.3 V dc, 76-Pin

  • RS Stock No. 146-6842
  • Mfr. Part No. FT602Q-T
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The FT602 is a high performance FIFO interface to USB 3.1 UVC bridge chip. This chip is specially designed to transfer YUV422 uncompressed format video data from a 32bit FIFO interface to a USB 3.1 bus, supporting resolutions up to 1920x1080@60pfs. It can be used in those applications which require high resolution imaging devices. The FIFO interface can support multi-voltage I/O (1.8V, 2.5V, 3.3V) and operating frequencies of 66MHz or 100MHz. (100MHz supported by 2.5V or 3.3V only.) There are 2 different proprietary synchronous bus protocols supported, one FIFO bus protocol is called the “Multi-Channel FIFO” bus protocol, also known as the FT600 FIFO protocol and the other is the “245 Synchronous FIFO” bus protocol. The latter being an extension of the interface introduced in the FT232H/FT2232H devices. FIFO bus data lines are driven by the FIFO master, the FT602 only reads data from the FIFO master.

Supports USB 3.1 GEN 1 Super Speed (5Gbps) / USB 2.0 High Speed (480Mbps)
Supports USB Transfer Types: Control/Bulk/Interrupt
Supports UVC version 1.1,
Supports up to 4 video input channels on the FIFO bus.
Supports 2 parallel slave FIFO bus protocols,245 FIFO and Multi-channel FIFO mode, with a data burst rate up to 400MB/s with 32 bit parallel interface.
Built-in 16kB FIFO data buffer RAM.
Built-in I²C master interface for video device configuration
Supports multi voltage I/O: 1.8V, 2.5V and 3.3V.
Internal LDO 1.0V regulator.
Integrated power-on-reset circuit.
User programmable USB descriptors.
Industrial operating temperature range: -40 to 85⁰C.
Available in compact Pb-free QFN-76 RoHS compliant package.

Specifications
Attribute Value
Number of Transceivers 2
Data Rate 5 (USB 3.0) Gbit/s, 480 (USB 2.0) Mbit/s
Protocols Supported USB 2.0, USB 3.0
Power Supply Type Single
ESD Protection Yes
Typical Single Supply Voltage 3.3 V dc
Mounting Type Surface Mount
Package Type QFN
Pin Count 76
Dimensions 9.1 x 9.1 x 0.95mm
Height 0.95mm
Length 9.1mm
Maximum Operating Temperature +85 °C
Width 9.1mm
Minimum Operating Temperature -40 °C
243 In stock for delivery within 4 working days
Price Each
SGD 14.60
(exc. GST)
SGD 15.62
(inc. GST)
units
Per unit
1 - 9
SGD14.60
10 - 49
SGD13.21
50 - 99
SGD11.85
100 +
SGD11.47
Packaging Options:
Related Products
The LM780 from LM Technologies is a Bluetooth ...
Description:
The LM780 from LM Technologies is a Bluetooth serial data module featuring a class 2 radio with an integrated chip antenna. It is ideal for short-range wireless connectivity for embedded applications. The LM780 offers up to 25m in open space ...
The NCV7428 is a System Basis Chip integrating ...
Description:
The NCV7428 is a System Basis Chip integrating power supplies, undervoltage detection and a LIN bus transceiver typically for automotive Electronic Control Unit (ECU) applications. This device is AEC-Q100 qualified for automotive use. • Output supply voltage: +3.3V (NCV7428D13), +5V ...
Designed to replace an existing DE9 connector, (male ...
Description:
Designed to replace an existing DE9 connector, (male or female) RS-232/TTL UART connection with a drop-in USB replacement connection. Miniaturised modules which closely resemble a DE9 connector for PCB mountingUSB mini-B socket connectorThe modules contain a USB-Serial bridge IC and ...
The Microchip SEC1110/1210 family of devices are Smart ...
Description:
The Microchip SEC1110/1210 family of devices are Smart Card Bridge ICs with USB, SPI and UART interfaces. Through an effective combination of hardware and software the SEC1110 and SEC1210 offer a high-performance customisable solution. The SEC1110/1210 devices are certified to ...