APC Leak Rope Sensor For Use With NetBotz Sensor

  • RS Stock No. 779-3885
  • Mfr. Part No. NBES0308
  • Manufacturer APC
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

APC NetBotz Rope Leak Sensor

Length: 6 m (20 ft)
Provides early detection of fluid in the data center or Network closet along the entire length
Compat with select NetBotz appliances
Small sensors allow for placement flexibility
Add sensors for monitoring temperature, humidity, fluid, vibration, dust particles, etc
Unique identifiers for customizing each sensor with a different name and location

Note

You can extend the total length of the Rope Leak Sensor up to 30.5 m (100 ft) using NetBotz 6.1-m (20-ft) Rope Leak Sensor Extensions (NBES0309) RS 779-3891

Supplied with

Cable ties

APC NetBotz® Sensors

Warning

  • Use the Rope Leak Sensor with a NetBotz Rack Monitor 450 or NetBotz Rack Monitor 550 only. Make sure you connect the sensor to the appliance as shown
Specifications
Attribute Value
Accessory Type Leak Rope Sensor
For Use With NetBotz Sensor
Dimensions 70 x 171 x 161mm
Depth 161mm
Length 70mm
Width 171mm
2 In stock for delivery within 5 working days
Price Each
SGD 394.75
(exc. GST)
SGD 422.38
(inc. GST)
units
Per unit
1 +
SGD394.75
Related Products
The Wurth Elektronik differential pressure sensor mostly used ...
Description:
The Wurth Elektronik differential pressure sensor mostly used in HVAC, filter monitoring, gas leak detection, inhalers and fume hood. It operates on MEMS based piezo-resistive sensing principle. It has analogue and I²C digital communication interface. Pressure sensing range is from ...
Uninterruptible battery power supply units are the ideal ...
Description:
Uninterruptible battery power supply units are the ideal solution to an unstable mains supply. With IQ technology they provide information regarding the charging state, remaining runtime and the service life of your rechargable battery module. Now, also available, a UPS ...
The Schneider Electric UPS network management card 3 ...
Description:
The Schneider Electric UPS network management card 3 supports reporting UPS information to Building Management Systems or other third party management systems via BACnet/IP (BTL certified) (Single Phase Smart-UPS only) also offers simultaneous remote management access through Telnet and SSH. ...
Combining a SITOP power supply and a 90° ...
Description:
Combining a SITOP power supply and a 90° mounting bracket results in a minimum surface area requirement on the rear panel of the control cabinet. The width of the power supply becomes the depth, and the depth becomes the width. ...