PR Electronics 3112, Temperature to Current Signal Conditioner, Temperature -200 → +850 °C Input

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DK
Product Details

3000 Series - Temperature Converter

PR Electronics 3000 series temperature transmitters offer reliable and accurate conversion of industry process temperature signals to analogue or digital outputs. The easy DIP-switch set-up allows for more than 1000 different pre-calibrated temperature range combinations. The 3000 series are compact, fast, and easy to use. With a slim 6 mm housing that offers exceptional performance and EMC immunity for dedicated applications.
Designed and rated to operate between -25 ˚C to +70 ˚C, making these devices a good choice in applications where the ambient temperature changes greatly, for example in control panels mounted in outdoor locations. These transmitters have a low temperature coefficient achieving precise measurements, even when the panel is exposed to wide variations in ambient temperature. You can continue to rely on the output signal, with no need to re-calibrate your device.

Features and Benefits

• High basic 0.05% accuracy in all available signal ranges
• All units tested to ensure 2.5 kVAC isolation and have excellent noise immunity
• NAMUR NE21 burst A criteria
• Transmits rapid changes in process measurements to your PLC/DCS for fast and accurate monitoring of critical signals
• Response time of < 30 ms for temperature measurements
• Low temperature coefficient better than 0.01% / °C in a wide -25 to +70°C ambient temperature range for precise measurements
• Long term accuracy better than 0.1% / 3 years with no need for re-calibration

DIP-Switch Programming

Re-calibration is not needed after changing the DIP-switch range settings. Just change the DIP-switch, cycle the power to the unit and obtain the new, pre-calibrated I/O range. HART programming is enabled for selected devices.

Mounting

Devices can be mounted both vertically and horizontally with no air gap separation required. The devices snap onto a power rail or DIN rail and are easily detached by lifting the bottom lock.

High Level of Isolation

Safe galvanic isolation of 2.5 kVAC provides high noise immunity and prevents ground loops for accurate delivery of the process signal to your control system.

Device Status Indicators

A front LED indicates device status, e.g. an error in the set-up, sensor or hardware.

Over Voltage and Polarity Protection

All terminals can withstand up to ±31.2 VDC and are protected against incorrect supply wiring to ensure safe, error-free installation.

PR Electronics DIN Rail Mounting

Specifications
Attribute Value
Input Type Temperature
Supply Voltage 16.8 → 31.2 V dc
Minimum Operating Temperature -25°C
Maximum Operating Temperature +70°C
Series 3112
Temporarily out of stock - back order for despatch 10/06/2020, delivery within 5 working days from despatch date
Price Each
SGD 200.60
(exc. GST)
SGD 214.64
(inc. GST)
units
Per unit
1 +
SGD200.60
Related Products
AXIS Companion Eye is an outdoor-ready fixed mini ...
Description:
AXIS Companion Eye is an outdoor-ready fixed mini dome with IK08-rating against vandalism. With 3-axis camera angle it offers a 115° horizontal view which can easily be adjusted even to corridor format. AXIS Companion Eye has a compact, flat-faced design ...
Sony exmor 2mp image sensortriple codec (H.264/MPE/MJPEGG)triple streamsupport ...
Description:
Sony exmor 2mp image sensortriple codec (H.264/MPE/MJPEGG)triple streamsupport onvif latest versionsupport poe cabletrue day and night 24IR LEDsmega 3.6mm fixed lens.
Lapp NYM-J standard wiring and installation cable that ...
Description:
Lapp NYM-J standard wiring and installation cable that is designed for use in plaster, brickwork and concete. Bare copper conductorsPVC-based wire insulationPVC-based outer sheathAbove, below, flush and recess routingSuitable for dry, damp and wet room applicationsSuitable for outdoor use if ...
From Lapp, the Olflex Control cable is a ...
Description:
From Lapp, the Olflex Control cable is a robust power and control solution for industrial, plant engineering and wind turbine applications.The cable features a high degree of mechanical and torsional resistance, which makes it ideal for dynamic applications. The control ...