PR Electronics 3102, Temperature to Current Signal Conditioner, Temperature -200 → +850 °C Input

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DK
Product Details

3000 Series - Temperature Converter

PR Electronics 3000 series temperature transmitters offer reliable and accurate conversion of industry process temperature signals to analogue or digital outputs. The easy DIP-switch set-up allows for more than 1000 different pre-calibrated temperature range combinations. The 3000 series are compact, fast, and easy to use. With a slim 6 mm housing that offers exceptional performance and EMC immunity for dedicated applications.
Designed and rated to operate between -25 ˚C to +70 ˚C, making these devices a good choice in applications where the ambient temperature changes greatly, for example in control panels mounted in outdoor locations. These transmitters have a low temperature coefficient achieving precise measurements, even when the panel is exposed to wide variations in ambient temperature. You can continue to rely on the output signal, with no need to re-calibrate your device.

Features and Benefits

• High basic 0.05% accuracy in all available signal ranges
• All units tested to ensure 2.5 kVAC isolation and have excellent noise immunity
• NAMUR NE21 burst A criteria
• Transmits rapid changes in process measurements to your PLC/DCS for fast and accurate monitoring of critical signals
• Response time of < 30 ms for temperature measurements
• Low temperature coefficient better than 0.01% / °C in a wide -25 to +70°C ambient temperature range for precise measurements
• Long term accuracy better than 0.1% / 3 years with no need for re-calibration

DIP-Switch Programming

Re-calibration is not needed after changing the DIP-switch range settings. Just change the DIP-switch, cycle the power to the unit and obtain the new, pre-calibrated I/O range. HART programming is enabled for selected devices.

Mounting

Devices can be mounted both vertically and horizontally with no air gap separation required. The devices snap onto a power rail or DIN rail and are easily detached by lifting the bottom lock.

High Level of Isolation

Safe galvanic isolation of 2.5 kVAC provides high noise immunity and prevents ground loops for accurate delivery of the process signal to your control system.

Device Status Indicators

A front LED indicates device status, e.g. an error in the set-up, sensor or hardware.

Over Voltage and Polarity Protection

All terminals can withstand up to ±31.2 VDC and are protected against incorrect supply wiring to ensure safe, error-free installation.

PR Electronics DIN Rail Mounting

Specifications
Attribute Value
Input Type Temperature
Supply Voltage 16.8 → 31.2 V dc
Minimum Operating Temperature -25°C
Maximum Operating Temperature +70°C
Series 3102
7 Within 4 working day(s) (Global stock)
19 Within 5 working day(s) (Global stock)
Price Each
SGD 151.51
(exc. GST)
SGD 162.12
(inc. GST)
units
Per unit
1 +
SGD151.51
Related Products
The RX64M family of 32-bit microcontrollers features 120MHz ...
Description:
The RX64M family of 32-bit microcontrollers features 120MHz high-speed operation, large-capacity on-chip memory and Ethernet communication. • 120MHz 32-bit RXv2 core microcontroller• Up to 4MB Flash memory• 64KB Data Flash memory• 552KB RAM (512KB ECC, 32KB Non-ECC, 8KB Standby)• 32-bit ...
E5L series analogue and digital electronic thermostats. A ...
Description:
E5L series analogue and digital electronic thermostats. A high switching capacity of 10 A at 250 VAC enables direct load switchingA sensor is provided to enable immediate applicationSockets with finger protection (PTF14A-E) or without finger protection (PTF14A) can be usedSimple ...
“Easy cool” electronic controller is an electronic microprocessor ...
Description:
“Easy cool” electronic controller is an electronic microprocessor controllers with LED display developed for the management of refrigerating units, display cabinets and showcases; are designed for the management of static refrigerating units (no fan on the evaporator) operating at temperatures ...
Carel NTC probes are supplied in a plastic ...
Description:
Carel NTC probes are supplied in a plastic sheath with 6mm diameter, they are suitable for a variety of industrial applications. Designed to accompany a variety of Carel & Tempatron controllers. 6 x 15mm IP67 plastic sheath3m lead length.