Omron G3SD Series Solid State Relay, 1.1 A Load, PCB Mount, 26 V Load, 28.8 V Control

Ultra-small, dual in-line package (DIP) SSR
High isolation of 2500 Vac between input and output freeing inputs from noise surge generated in the load
Built-in varistor absorbs external surges
Uses same socket as the G6B series, see stk no 655-4682 for PCB socket

UL, CSA

G3SD-Z01P-US DC24 SSR – Solid state relay is an ultra-small relay with a dual in-line package (DIP). The terminals are compatible with the G6B series of electromagnetic relay. For AC switching the built-in varistor absorbs external surges. If close mounting is required a suitable heat sink is available.

• Ultra-small.
• Dual in-line package (DIP).
• DC Output.
• Rated load power supply 24 V dc.
• Rated load current 1 A.
• PCP Terminal.
• Zero cross function.
• Terminals compatible with G6B series relay (mix with G6B as application required).
• Close mounting possible.
• Built-in varistor absorbs external surges (SSR for AC switching).
• Photocoupler
• Rated output load 1 A, 4 to 24 V dc.
• Rated input voltage24 V dc.

• Operating voltage 19.2 to 28.8 V dc.
• Must operate voltage level 19.2 V dc.
• Must release voltage level 1 V dc min.
• Impedance 2.8 kΩ ±20%.

• Rated load voltage 4 to 24 V dc.
• Rated load voltage range 3 to 26 V dc.
• Load current 0.01 to 1 A.
• Inrush current 3 A (10 ms).

Operate time 1 ms max.
Release time 1 ms max.
Output ON voltage drop 1.5 V max.
Leakage current 0.1 mA max at 26 V dc.
Vibration resistance 10 to 55 to 10 Hz, 0.75 mm single amplitude, 1.5 mm double amplitude.
Shock resistance 1000 m/s².
Operating temperature (ambient) -30°C to 100°C.
Relay weight 13 g.

Zero cross function will allow the relay to turn ON when the AC load power supply approaches 0 V suppressing any noise generated with a sudden load current increase. Zero cross function is effective across 2 types of noise, noise on power lines and noise emitted into open space.