Burkert Solenoid Valve 089404, 2 port , NC, 24 V dc, 1/2in

  • RS Stock No. 439-212
  • Mfr. Part No. 089404
  • Manufacturer Burkert
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details
//media.rs-online.com/t_line/L439060-04.gif
//media.rs-online.com/t_line/L439240-02.gif
//media.rs-online.com/t_line/L478735-22.gif
//media.rs-online.com/t_line/LD439155-02.gif
//media.rs-online.com/t_line/LE439155-02.gif
//media.rs-online.com/t_line/LI439155-02.gif

Burkert Solenoid Valve

The Burkert 0255 series 1/2in G female solenoid valve has a supply voltage rating of 24VDC. This 2-port NC position valve is suitable for high pressure and high temperature. This direct-acting plunger solenoid valve has a heat-resistant slip-over epoxy encapsulated coil. The maximum opening and closing time of the valve is 20 milliseconds and 30 milliseconds. It is used with water, steam, air, gasses, hot oil, hydrocarbons and alkaline washing agents.
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the operation of the valve when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3/2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2/2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Features and Benefits

Maximum working pressure is 4bar
3-pin DIN connector can be positioned 360° in 90° increments
Brass body and PTFE Seal
Flow factor (Kv) is 0.5m³/h
Operating temperature ranges between -40°C and 55°C
Power consumption ranges between 35VA and 40VA (inrush AC)
Push-over solenoid system

Certifications

IP65 rated

Specifications
Attribute Value
Supply Voltage 24 V dc
Number of Ports 2
Operation Direct
Connection 1/2 in G Female
Connection Size 1/2in
Default Valve Position NC
Suitable Applications Alcohol, Fuel, Hydraulic Oil, Organic Solvent, Steam, Waste Gas, Water
Type 2/2
Orifice Diameter 4mm
Body Material Brass
Maximum Working Pressure 4 bar
Operating Temperature Range -40 → +55 °C
Minimum Operating Temperature -40°C
Maximum Operating Temperature +55°C
Connection Gender Female
Flow Factor Kv 0.5m³/h
Thread Standard or Connection Type G
Maximum Closing Time 30ms
Series 0255
Maximum Opening Time 80ms
Temporarily out of stock - back order for despatch 01/10/2020, delivery within 4 working days from despatch date
Price Each
SGD 286.60
(exc. GST)
SGD 306.66
(inc. GST)
units
Per unit
1 - 5
SGD286.60
6 +
SGD279.93
Related Products
Internal timers can be adjusted after the supply ...
Description:
Internal timers can be adjusted after the supply is isolated without removing the unit. Robust polyamide construction to DIN 43650For controlling RS solenoid valves and others with the same type of terminationProtected to IP65User programmable via built-in DIP switches and ...
2-pole and earthFor use with Burkert solenoid valve ...
Description:
2-pole and earthFor use with Burkert solenoid valve manifoldsOperating current: 10A maxSpike suppression: 20msModular plastic-bodied design for mounting flexibility in restricted spacesSilver-plated brass terminalsG 1/2 control portProtection class to IP65.
The Burkert Plug-in connection for the connection of ...
Description:
The Burkert Plug-in connection for the connection of electrical components according to DIN EN 175301-803 Form C (previously DIN 43650). Protected according to degree of protection IP 65With approvals: UR, CSA, VDEEasy to installAlso available with moulded-on cable connectionForm C ...
Orifice diameter of LVM10: 1.4mmOrifice diameter of LVM11: ...
Description:
Orifice diameter of LVM10: 1.4mmOrifice diameter of LVM11: 1.5mmAvailable with power-saving circuit2 port N.C. or N.O. types, 3 port Universal typeDiaphragm choice of EPDM, FKM or FFKM®Wetted part material: PEEK or PFA (body/plate).