Pepperl + Fuchs Addressing Device

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

AS-I Handheld Programmer

Determining the slave address
Readdressing with checking
The slave connection is short-circuit and overload proof
Addressing or programming up to a maximum of 62 slaves (A/B slaves)
Dimensions: 126 (H) x 70 (W) x 129 (D)
MODE key for switching between the different operating modes
Optional optical interface
Battery charger included with delivery display


Actuator Sensor Interface (AS-I)

Actuator Sensor Interface, AS-I

AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.
A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used).
By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours.
The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network.
Another feature of AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments.

Benefits of AS-I

Replaces hard wiring
High data speed
Low cost installation
Intelligent diagnostics
Easy to learn and install
Highly flexible
Can connect to other fieldbus systems
Off-site pre-assembly and test
Easy maintenance
Faster on-site commissioning
Host or stand alone use
Able to use standard sensors and actuators (using modules)

Attribute Value
Type Addressing Device
Temporarily out of stock - back order for despatch 20/04/2020, delivery within 3 working days from despatch date
Price Each
SGD 522.00
(exc. GST)
SGD 558.54
(inc. GST)
Per unit
1 +
Related Products
Radar transducer for fill level and volume measurement ...
Radar transducer for fill level and volume measurement of liquids and slurries in storage and process vesselsOne-piece polypropylene rod antennaSimple installation and commissioningProgramming with intrinsically safe infra-red hand programming device.
The teach adapter is connected between sensor and ...
The teach adapter is connected between sensor and cable. Lower and upper measuring range are set via DIP switch. The sensor can thus be adjusted easily to any application. Teach adapterFor programming of inductive encoders with SSI interface or incremental ...
The Carlo Gavazzi software smart configurator offers a ...
The Carlo Gavazzi software smart configurator offers a user friendly way to use sensor data to improve processes and predictive maintenance. A 5.5" HD touchscreen display and designated app offers quick access to advanced diagnostics, displaying operating hours, numbers of ...
Universal programming tool for all Siemens/Milltronics non contact ...
Universal programming tool for all Siemens/Milltronics non contact level instruments including stock no. 513-2449Compatible with all radar and ultrasonic level devicesInfra-red interfaceSealed unit long life batteryIP65 weatherproofIntrinsically safe for all locations, including hazardous.