MikroElektronika MIKROE-1797, Humidity Click Temperature & Humidity Sensor Add On Board for mikroBUS

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CS
Product Details

HDC1000 click mikroBUS™

The Click accessory modules plug into the mikroBUS™ sockets in MikroElektronika microcontroller development boards. The HDC1000 click™ is a humidity with integrated Temperature Sensor accessory board. It has an on board Texas Instruments HDC1000 humidity sensor and offers low power consumption and more. Communication is via mikroBUS™ I2C and INT lines and has a 3.3 V power supply. Applications include HVAC systems and thermostats.

The relative humidity (0-100%RH) is measured with ±3% accuracy
The temperature is measured from –20°C to 85°C with ±0.2°C accuracy
Operates as a slave device on the I2C interface
4 x slave byte address (select via the pair of onboard jumpers)
14-bit resolution measurements
Factory calibrated
Sensor resistant to dirt and dust
Ready-to-use examples
Supported in all MikroElektronika compilers
mikroBUS™ is a specially designed pinout standard with SPI, I2C, Analogue, UART, Interrupt, PWM, Reset and power supply pins

Note

Click board comes with the header strips soldered.

Click mikroBUS™ Sensor Boards

MikroElektronika has designed a range of boards to add new functions and enhance the development of your applications using the mikroBUS™ pinout standard socket. All in one click!
Click™ boards can add a range of sensing, Bluetooth, Wi-Fi, extra memory, UART communications, audio and much more functionality to your designs. Some boards also act as extensions for development platforms such as the Beaglebone, Arduino Uno and Raspberry Pi.

Specifications
Attribute Value
Sensor Technology Temperature & Humidity Sensor
For Use With MikroBUS
Kit Classification Add On Board
Kit Name Humidity Click
4 In stock for delivery within 3 working days
Price Each
SGD 28.17
(exc. GST)
SGD 30.14
(inc. GST)
units
Per unit
1 - 4
SGD28.17
5 - 9
SGD27.55
10 +
SGD27.16
Related Products
The LC231X module provides a low cost USB ...
Description:
The LC231X module provides a low cost USB to UART bridge using the FT231X IC to transfer data at up to 3M Baud. Ideal for programming Arduino Pro, ESP modules etc., the pinouts follow the industry standard FTDI TTL cable ...
The L638xE and L639x are high voltage devices ...
Description:
The L638xE and L639x are high voltage devices manufactured with the BCD™ “offline” technology. They are single chip half-bridge gate drivers for N-channel power MOSFET or IGBT. The high-side (floating) section is designed to stand a voltage rail up to ...
LoRa is short for Long Range Radio and ...
Description:
LoRa is short for Long Range Radio and is designed primarily for M2M and IoT applications. The trade-off for the extra distance is reduced speed and bandwidth but for the applications it is aimed at this is not an issue.The ...
These evaluation boards are complete implementations of the ...
Description:
These evaluation boards are complete implementations of the analog portion of a broadband direct conversion transmitter (analog baseband in, RF out). RF frequencies from 500MHz to 4.4GHz are supported using a phase-locked loop (PLL) with a broadband, integrated voltage controlled ...