- RS Stock No.:
- 143-8870
- Mfr. Part No.:
- STEVAL-STLCS02V1
- Manufacturer:
- STMicroelectronics
13 In stock for delivery within 4 working days
Added
Price Each
SGD59.18
(exc. GST)
SGD64.51
(inc. GST)
Units | Per unit |
1 + | SGD59.18 |
- RS Stock No.:
- 143-8870
- Mfr. Part No.:
- STEVAL-STLCS02V1
- Manufacturer:
- STMicroelectronics
Technical data sheets
Legislation and Compliance
Product Details
STEVAL-STLCS0xV1 SensorTile Wireless Sensor Board
The STEVAL-STLCS0xV1 SensorTile integrates movement sensing, barometric pressure sensing, an electronic compass, a MEMS microphone, STM32 MCU and a BlueNRG BLE network processor on a tiny PCB. It supports development of monitoring/tracking applications such as IoT standalone sensor nodes linked to iOS™ or Android™ smartphones.
Module Features
80MHz STM32L476JG Cortex M4F low-power MCU with 1MB Flash memory, 128KB RAM
LSM6DSM iNEMO inertial module: 3D accelerometer and 3D gyroscope
LSM303AGR eCompass module: 3D accelerometer and 3D magnetometer
LPS22HB MEMS digital barometer: 260 to 1260hPa absolute pressure
MP34DT04 MEMS digital microphone with 64dB SNR
BlueNRG-MS Bluetooth 4.1 network processor
BALF-NRG-01D3 50Ω balun with integrated harmonic filter
Chip antenna
LD39115J18R +1.8V @ 150mA LDO regulator
SWD interface for firmware debugging/programming
External interfaces: UART, SPI, SAI, I²C, DFSDM, USB OTG, ADC, GPIO
Available with plug-in and/or solder host board connection
Power supply: +2.0 to +5.5Vdc
Dimensions: 13.5 x 13.5mm
LSM6DSM iNEMO inertial module: 3D accelerometer and 3D gyroscope
LSM303AGR eCompass module: 3D accelerometer and 3D magnetometer
LPS22HB MEMS digital barometer: 260 to 1260hPa absolute pressure
MP34DT04 MEMS digital microphone with 64dB SNR
BlueNRG-MS Bluetooth 4.1 network processor
BALF-NRG-01D3 50Ω balun with integrated harmonic filter
Chip antenna
LD39115J18R +1.8V @ 150mA LDO regulator
SWD interface for firmware debugging/programming
External interfaces: UART, SPI, SAI, I²C, DFSDM, USB OTG, ADC, GPIO
Available with plug-in and/or solder host board connection
Power supply: +2.0 to +5.5Vdc
Dimensions: 13.5 x 13.5mm
RS Product Codes
125-3924 STEVAL-STLKT01V1 SensorTile Evaluation Kit
Note
The module can be built into a production device, but will require screening and testing to prove compliance with regional RF emissions regulations.
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
Sensor Solution Evaluation Boards, STMicroelectronics
Specifications
Attribute | Value |
---|---|
Sensor Technology | Motion Sensor |
Kit Classification | Data Capture Card |
Kit Name | SensorTile |