MikroElektronika ECG click Heart Rate Sensor mikroBus Click Board for MAX6106, MCP609
- RS Stock No.:
- 136-0853
- Mfr. Part No.:
- MIKROE-2455
- Manufacturer:
- MikroElektronika
Temporarily out of stock - back order for despatch 24/06/2024, delivery within 4 working days from despatch date
Added
Price Each
SGD58.61
(exc. GST)
SGD63.88
(inc. GST)
| Units | Per unit |
| 1 + | SGD58.61 |
- RS Stock No.:
- 136-0853
- Mfr. Part No.:
- MIKROE-2455
- Manufacturer:
- MikroElektronika
Technical data sheets
Legislation and Compliance
Product Details
ECG click mikroBUS™
The MikroElektronika ECG Click Board is an accessory board that provides a simple method of adding electrocardiogram measurement hardware to a development platform.
Like all Click Boards the ECG Click fits the popular mikroBUS™ socket, creating a plug-in solution to add functionality, removing the need for hardware configuration.
The ECG Click measures electrical activity of the heart through 3 electrodes taped to the skin that connect to the board via a 3.5mm jack. The circuity of the ECG click amplifies the electrical signals from the heart and filters out noise, providing a clean and clear signal for the mother development board.
The MikroElektronika MikroPlot software, a free to download data visualisation tool, can be used to analyse the data generated and create an ECG plot.
Like all Click Boards the ECG Click fits the popular mikroBUS™ socket, creating a plug-in solution to add functionality, removing the need for hardware configuration.
The ECG Click measures electrical activity of the heart through 3 electrodes taped to the skin that connect to the board via a 3.5mm jack. The circuity of the ECG click amplifies the electrical signals from the heart and filters out noise, providing a clean and clear signal for the mother development board.
The MikroElektronika MikroPlot software, a free to download data visualisation tool, can be used to analyse the data generated and create an ECG plot.
Features
Fits the popular mikroBUS™ socket
7-block design (protection, preamplifier, high-pass filter #1, amplifier, high-pass filter #2, low-pass filter, DRL circuit)
Jumpers for setting output voltage range
Trimmer potentiometer to adjust gain
MCP609 Op Amp
MAX6106 Voltage Reference IC
ESD, Overvoltage and Overcurrent protection
Analogue output (mikroBUS™ AN pin)
5 V power supply
7-block design (protection, preamplifier, high-pass filter #1, amplifier, high-pass filter #2, low-pass filter, DRL circuit)
Jumpers for setting output voltage range
Trimmer potentiometer to adjust gain
MCP609 Op Amp
MAX6106 Voltage Reference IC
ESD, Overvoltage and Overcurrent protection
Analogue output (mikroBUS™ AN pin)
5 V power supply
Package Contents
1 x ECG Click Board
Note
Electrodes and connecting cables are not included. A kit that includes electrodes and cables with the ECG Click is available, MikroElektronika part MIKROE-2458.
The target board requires an MCU with a minimum 10-bit ADC.
Click board comes with the header strips soldered.
The target board requires an MCU with a minimum 10-bit ADC.
Click board comes with the header strips soldered.
Click mikroBUS™ Biomedical Boards
Specifications
Attribute | Value |
|---|---|
| Sensor Technology | Heart Rate Sensor |
| Featured Device | MAX6106, MCP609 |
| Kit Classification | mikroBus Click Board |
| Kit Name | ECG click |