FTDI Chip TTL-234X-3V3-WE for use with VDRIVE2 or VMUSIC2 Modules

  • RS Stock No. 150-1575
  • Mfr. Part No. TTL-234X-3V3-WE
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

TTL-234X Converter Cable provides a USB to TTL Serial interface with various end connectors.
On board FT234XD provides single chip USB to asynchronous serial data transfer interface.
Entire USB protocol handled by the electronics in the cable USB.
Connect directly to a microcontroller UART or I/O pins.
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.

The TTL-234X-5V-WE and TTL-234X-3V3-WE cables are both un-terminated, they are bare and tinned wires. The difference between the two cables is that the TTL-234X-5V-WE operates at +5V levels (signals and power supply) and the TTL-234X-3V3-WE operates at +3.3V levels (signals only, VCC=+5V).

Specifications
Attribute Value
For Use With VDRIVE2 or VMUSIC2 Modules
Temporarily out of stock - back order for despatch 19/08/2020, delivery within 4 working days from despatch date
Price Each
SGD 27.13
(exc. GST)
SGD 29.03
(inc. GST)
units
Per unit
1 +
SGD27.13
Related Products
The NCV7428 is a System Basis Chip integrating ...
Description:
The NCV7428 is a System Basis Chip integrating power supplies, undervoltage detection and a LIN bus transceiver typically for automotive Electronic Control Unit (ECU) applications. This device is AEC-Q100 qualified for automotive use. • Output supply voltage: +3.3V (NCV7428D13), +5V ...
The J-Link 9-pin Cortex-M Adapter allows JTAG, SWD ...
Description:
The J-Link 9-pin Cortex-M Adapter allows JTAG, SWD and SWO connections between J-Link and ARM Cortex-M based target hardware systems. • J-Link BASE, J-Link PLUS, J-Link PRO, J-Link ULTRA+, J-Link EDU, Flasher ARM, Flasher Portable.
The JTAG-HS3 programming cable allows high-speed programming/debugging of ...
Description:
The JTAG-HS3 programming cable allows high-speed programming/debugging of Xilinx FPGA and SoC devices from a host PC. • Separate Vref drives JTAG signal voltages• Vref can be any voltage between +1.8V and +5V• USB 2.0 HS port drives JTAG bus ...
The Universal Case is Pycom’s very own universal ...
Description:
The Universal Case is Pycom’s very own universal waterproof case, with push-in tabs that fit accessory sensors perfectly, creating a water tight seal. Two holes go straight through the case without penetrating the inner compartment, meaning you can fix the ...