Schneider Electric Light Beam/Curtain Safety Relay, 24V dc, 2 Safety Contacts

RS Stock No.:: 477-8684
Mfr. Part No.:: XPSCM1144
Manufacturer:: Schneider Electric

Schneider Electric Light Beam/Curtain Safety Relay, 24V dc, 2 Safety Contacts

Temporarily out of stock - back order for despatch 03/05/2024, delivery within 4 working days from despatch date

Added

Price Each

SGD802.71

(exc. GST)

SGD874.95

(inc. GST)

Units	Per unit
1 - 5	SGD802.71
6 +	SGD785.87

RS Stock No.:: 477-8684
Mfr. Part No.:: XPSCM1144
Manufacturer:: Schneider Electric

Technical data sheets

Legislation and Compliance

RoHS Status: Not Applicable

Product Details

XU2 S, Type 2, Single Beam System

The XPS-CM safety module, used in conjunction with the single beam XU2S safety light devices, constitutes a type 2 safety light curtain conforming to IEC 61496-1.

Features.

Flexibility allows connection of up to 4 light beam devices which can protect a zone up to 1200mm high and 8m wide (EN999)
Automatic self-checking every 5ms
Built in muting function allows the light device to be inhibited by an external sensor
Single beam sensors (for muting function) available separately
Ideal for transfer line applications
Solid state auxiliary output (from module) PNP 20mA/24Vdc
2 N/O safety outputs

These safety modules can be used in conjunction with the Harmony XY2SB range of two-hand control stations

What Safety Relay should I use with a Two Hand Control Station?

Safety modules XPS BA, BC and BF may be used for two-hand control stations in order to comply with the requirements of European standard EN 574/ISO 13851 for two-hand control systems.

XPSCM1144 Features and Benefits.

Telemecanique safety module XPSCM.

For monitoring Single Beam photo electric sensor.

Built-in muting.

Inputs – 2 x terminals MA, MB for muting function, 4 x terminals Z1, Z2, Z3, Z4 – for the sensor.

Input voltage of 24 V dc (sensor), 24 V dc (muting) terminals U+, U-.

Input capacity - XC limit switch for muting function, XU2M18PP340 for muting function, XU2S18PP340 (infrared) for sensor, XU9M18PP340 for muting function.

Captive screw clamp terminals.

2 NO output, volt free (13-14, 23-24).

Rated supply voltage 24 V dc.

Sensor power supply U+, U- / 24 V dc.

Sensor supply current 200 MA.

Maximum muting duration of 60 s (-10 – 30%).

Line resistance 10 Ohm for sensor power supply (maximum).

Output current 10 MA (relay).

Output voltage 17 V (relay) minimum.

25 Ms response time (maximum) on input open.

LEDs - 1 LED, function electronic internal fuse status, 1 LED, function restarting, 1 LED, function safety outputs closed, 1 LED, function safety outputs open, 1 incandescent lamp, function muting power consumption: 4 - 6.5 W.

15 W Maximum power consumption.

Electronic internal fuse.

IP Protection.

IP20 (terminals) conforming to IEC 60529.

IP40 (enclosure) conforming to IEC 60529.

Safety.

Can reach category 2 with the appropriate control system and correctly wired conforming to EN/ISO 13849-1.

Can reach SILCL 1 with the appropriate control system and correctly wired conforming to EN/IEC 62061.

Can reach PL = c with the appropriate control system and correctly wired conforming to EN/ISO 13849-1

Safety Reliability.

MTTFd = 16.6 years conforming to EN/ISO 13849-1.

DC = 95.5 % conforming to EN/ISO 13849-1.

PFH = 3.12E-7 1/h conforming to EN/IEC 61508.

PFHd = 3.12E-7 1/h conforming to EN/IEC 62061.

Note

This product is supplied with a full installation instruction manual which should be strictly adhered to. Particular attention should be given to section 3.5 (installation positioning and electrical inter-phasing).

Single Beam Safety Device

Specifications

Attribute	Value
Supply Voltage	24V dc
Safety Contacts	2
Function	Light Beam/Curtain
Auxiliary Contacts	4
Range	Preventa
Safety Category ISO 13849-1	2
PL ISO 13849-1	c
SIL IEC 61508	1
Terminal Type	Screw
Better World Verification	Green Premium
Series	XPS CM
Depth	114mm
Width	45mm
Better World Product	Yes
Performance Level	c
Length	99mm