Schneider Electric Dual-Channel Emergency Stop, Safety Mat/Edge, Safety Switch/Interlock Safety Relay, 115V ac, 2
- RS Stock No.:
- 464-502
- Mfr. Part No.:
- XPSATE3410P
- Manufacturer:
- Schneider Electric
Discontinued product
Alternative
This product is not currently available. Here is our alternative recommendation.
- RS Stock No.:
- 464-502
- Mfr. Part No.:
- XPSATE3410P
- Manufacturer:
- Schneider Electric
Legislation and Compliance
- COO (Country of Origin):
- ID
Product Details
XPS ATE, Dual Channel with Timed Delay (0-30s)
The Schneider Electric XPS-ATE range of safety modules have been created and designed to be used for monitoring emergency stop circuits. They provide protection for both machines and operators through immediately stopping the dangerous movement on receipt of a stop instruction or if a fault is detected within the circuit.
Features & Benefits
2 N/O instantaneous outputs provide stop category 0, 3 N/O timed contacts provide stop category 1 by allowing controlled deceleration of the motor until a complete stop is achieved
4 solid state outputs for PLC signalling
Monitored start button feature
Delay time: 0 – 30 s. adjustable in 12 steps by using the selector switch in the module front cover
Provides protection for machine and operator by immediately stopping dangerous movement on receipt of a stop instruction from operator, or on detection of a fault in the safety circuit. Applications include safety mats, safety edges, e-stop and safety gates
2 channel monitoring and feedback loop
Shorts across contacts, between channels and ground monitored
Voltage on input channels: 48Vdc
4 LEDs to indicate control supply/fuse, input channel A and B, stop Cat. 1 outputs closed
Internal electronic fuse for input channels reset on removal of fault
Synchronisation time between input A and B when using automatic start feature = 75ms approx
Pull off terminals for a simple and quick maintenance
4 solid state outputs for PLC signalling
Monitored start button feature
Delay time: 0 – 30 s. adjustable in 12 steps by using the selector switch in the module front cover
Provides protection for machine and operator by immediately stopping dangerous movement on receipt of a stop instruction from operator, or on detection of a fault in the safety circuit. Applications include safety mats, safety edges, e-stop and safety gates
2 channel monitoring and feedback loop
Shorts across contacts, between channels and ground monitored
Voltage on input channels: 48Vdc
4 LEDs to indicate control supply/fuse, input channel A and B, stop Cat. 1 outputs closed
Internal electronic fuse for input channels reset on removal of fault
Synchronisation time between input A and B when using automatic start feature = 75ms approx
Pull off terminals for a simple and quick maintenance
XPSATE3410P Features and Benefits.
- XPSATE Series
- For emergency stop and switch monitoring applications.
- Emergency stop button with 2 NC contacts.
- Configurable.
- Captive screw clamp terminals.
- Output Relay instantaneous opening, 2 NO circuit(s), volt-free, Relay time delay opening, 3 NO circuit(s), volt-free.
- 3 solid state additional outputs.
- 115 V ac Rated supply voltage.
- Frequency 50/60 Hz.
- Maximum power consumption 8W.
- Internal, electronic input protection.
- Breaking capacity 180 VA holding AC-15 C300 relay output. 1800 VA inrush AC-15 C300 relay output.
- Minimum output current 10 mA for relay output.
- Minimum output voltage 17 V for relay output.
- 4 LEDs.
- 35 mm symmetrical DIN rail mounting.
- Weight 0.38 kg.
- IP20 (terminals) conforming to EN/IEC 60529.
- IP40 (enclosure) conforming to EN/IEC 60529.
Safety Level.
- Can reach PL d/category 3 time delay safety outputs conforming to EN/ISO 13849-1. Can reach PL e/category 4 instantaneous safety outputs conforming to EN/ISO 13849-1. Can reach SILCL 3 instantaneous safety outputs conforming to EN/IEC 62061. Can reach SILCL 2 time delay safety outputs conforming to EN/IEC 62061.
Standards.
- EN/IEC 60204-1, EN/IEC 60947-5-1, EN/ISO 13850.
Certificates.
- CSA, TÜV, UL.
Specifications
Attribute | Value |
---|---|
Supply Voltage | 115V ac |
Number of Channels | 2 |
Safety Contacts | 2 |
Function | Emergency Stop, Safety Mat/Edge, Safety Switch/Interlock |
Auxiliary Contacts | 4 |
Reset Method | Automatic & Manual |
Range | Preventa |
Safety Category ISO 13849-1 | 3 |
Terminal Type | Screw |
Configurable | Yes |
Width | 45mm |
Series | XPS ATE |
Depth | 114mm |
Length | 99mm |