Kraus & Naimer, 4P 3 Position Rotary Switch, 25 A, Rotary Knob Actuator

  • RS Stock No. 758-614
  • Mfr. Part No. CA20A213/GBA001E
  • Manufacturer Kraus & Naimer
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): IE
Product Details

Changeover (CO) Switches

Suitable for standard low voltage control/load switching and extra low voltage and electronics applications
Ring type terminal or Faston push-on cable end connectors
Switch bodies supplied with appropriate legend plate
Thermal rated current Ith IEC 947-3 (This is detailed in the ’Current Rating’ column in the price table)

Note

The current ratings shown in brackets meet the requirements of IEC 408, BS5419, and VDE 0660

//media.rs-online.com/t_line/L400501-01.gif
//media.rs-online.com/t_line/LD400501-03.gif
//media.rs-online.com/t_line/LD400501-04.gif
//media.rs-online.com/t_line/LD400501-05.gif
//media.rs-online.com/t_line/LI400501-10.gif
Specifications
Attribute Value
Pole and Throw Configuration 4P
Normal State Configuration NO/NC
Maximum Current 25 A
Number of Positions 3
Length 48mm
Width 48mm
Depth 74mm
Actuator Type Rotary Knob
Dimensions 48 x 48 x 74 mm
1 In stock for delivery within 4 working days
Price Each
SGD 72.04
(exc. GST)
SGD 77.08
(inc. GST)
units
Per unit
1 +
SGD72.04
Related Products
A range of IP65 protected components which are ...
Description:
A range of IP65 protected components which are easily and quickly mounted in 16mm diameter holes. Each component can be ordered separately to build the required device. Also available are contact blocks with slow-break positive opening contacts with ’Faston’/solder connections. ...
Panel mounting for use in Zone 1 hazardous ...
Description:
Panel mounting for use in Zone 1 hazardous areas. Maximum panel thickness is 5mm and the mounting hole required is 30.5mm diameter.,Front element is fixed to panel using the clamp nut. Body/contact block components fitted from rear utilising the built ...
Robust design for use in industrial applications also ...
Description:
Robust design for use in industrial applications also suitable for electronic applicationsExcellent contact reliability at 30mV and 5mAWill withstand high potential of 600VGold plated ’H’ bridge contact system.
A range of adaptable cam switches which can ...
Description:
A range of adaptable cam switches which can be used for panel building,HVAC and motor control applications. Operating currents to EN 60 947-3Voltage rating up to 690Vac (3 phase)Breaking capacity AC22, AC23Fingerproof terminals to IP20Switch protection rating IP65, but note ...