Eccel Technology Ltd RFID Reader OEM-MICODE-USB (000128), Reader/Writer

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

OEM-MICODE RFID Reader Boards

The OEM-MICODE Reader Boards are complete Read/Write system for ISO14443A Mifare 1k, Mifare 4k, Ultralight and ICODE. The Boards have an integrated PCB track antenna, LEDs, TTL serial and I/O interface. Also included on the board is power supply filtering, antenna-trimming capacitor and LEDs for visual indication of card acceptance. The J2 connector also allows the OEMMICODE board to be reprogrammed with custom firmware.
Two versions are available:
RS232 connector requiring 5 V supply (RS 1262182)
USB using USB bus for power supply (RS 1262181)

Features:

• Complete “plug-and-go” RFID Read / Write system • Integrated PCB antenna, LEDS, RS232 or USB interface.
• Supports Mifare 1k, 4k, Ultralight and ICODE (including contactless read/write to Mifare
ProX, SmartMX / JCOP cards)
• Average current consumption down to 100 micro Amps even when fully active
• Auxiliary output options for automatic data output as serial or Wiegand protocol

Note

DESFire and Mifare PLUS cards are supported for serial number acquisition only.

RFID - Eccel

Specifications
Attribute Value
Component Type Reader/Writer
Supported Bus Interfaces USB
Supply Voltage 5V
Series OEM-MICODE
Length 75mm
Width 50mm
Temporarily out of stock - back order for despatch 27/04/2020, delivery within 3 working days from despatch date
Price Each
SGD 67.78
(exc. GST)
SGD 72.52
(inc. GST)
units
Per unit
1 +
SGD67.78
Related Products
The Digimatic DMX multiplexer allows users to transmit ...
Description:
The Digimatic DMX multiplexer allows users to transmit measurement data to application programs.The application can be used to configure the device used, the measurement frequency etc.This interface, controlled by a microcontroller, is designed to connect a measuring instrument to the ...
The TRH031M device is a highly-integrated multi-protocol reader ...
Description:
The TRH031M device is a highly-integrated multi-protocol reader for contactless communication. RF Operating Frequency: 13.56MHzProximity operating distance: up to 100mmAutomatic external Interface type detectionAutomatic and flexible interrupt handling64-byte Tx/Rx FIFO bufferHost communication: SPI, parallelBit- ...
The RWD-QT-LP-SMT is a surface mount (SMT) package ...
Description:
The RWD-QT-LP-SMT is a surface mount (SMT) package option suitable for modern printed circuit boards. Supports HitagS256, HitagS2048, Hitag1, Hitag2 and EM4XXX transponders at 125 KHz. To be used with baseboard RWD-QT-SMT for evaluation and development.
The MicroRWD chip module is a complete RF ...
Description:
The MicroRWD chip module is a complete RF transponder. Requires connection to the coil antenna. Tag Reader / Writer ModulePerforms all Read / Write functionsSimple RS-232 interface24pin DIL PCB mounting moduleUp to 10cm range on 13.56MHzFast Baud rates up to ...