JSP BMN750-000-600 Dust, Mist Filter Cartridge for use with JSP FORCE8 Respirator Mask

  • RS Stock No. 181-2934
  • Mfr. Part No. BMN750-000-600
  • Manufacturer JSP
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CN
Product Details

PressToCheck™ P3-Filters

For use with Force 8™ Half Mask RS 879-2937
Low profile cover protects the enclosed pleated filter from moisture and foreign objects that could damage the pleats
Bayonet connector
Reduced breathing resistance
With an integrated inhalation valve

P3 Filters (RS 879-2930 )

High efficiency dust protection
Particulate protection only

A2 P3 Filters (RS 879-2934 )

High efficiency dust protection
Medium capacity gas / vapour protection

ABEK1 P3 Filters (RS 879-2943 )

High efficiency dust protection
Low capacity gas / vapour protection

Standards

EN143

JSP Reusable Respirator Accessories

The JSP filter is a reusable respirator accessory with low profile cover that protects the enclosed pleated filter from moisture and foreign objects that could damage the pleats. It is a bayonet connector.

Features and Benefits

• Dusts fine
• Half mask respirator
• High efficiency dust protection
• Paint stripping, chemical or heat
• Particulate protection only
• Reduced breathing resistance with an integrated inhalation valve
• Solvent based brush painting

Applications

Filtered respirator facemasks are essential PPE for environments where particle ingress can be potentially hazardous to your health, such as gas, vapours or dust. They are often more suitable for heavy-duty tasks than disposable facemasks. These filters are sutiable for;
• Dusts fine
• Water based painting
• Solvent based brush painting
• Rubbing down paint
• Paint stripping, chemical or heat
• White spirit
• Formaldehyde
• Woods (hard and soft)

Correct use of respirators

When it comes to respiratory protection, the correct fitting and testing of your respirator is just as important as selecting the correct respiratory protective equipment for your working conditions. Be sure to follow all pertinent instructions and that health and safety best practice is adhered to at all times. Always be sure to use the correct filters for your environment, and make sure the replacement filters are changed as regularly as is recommended.

Certifications

• EN143

Specifications
Attribute Value
Filter Type Dust, Mist
For Use With JSP FORCE8 Respirator Mask
455 In stock for delivery within 4 working days
Price Each
SGD 28.985
(exc. GST)
SGD 31.014
(inc. GST)
units
Per unit
Per Pack*
2 +
SGD28.985
SGD57.97
*price indicative
Related Products
The Alpha Solway has been specifically designed to ...
Description:
The Alpha Solway has been specifically designed to ensure an excellent fit for the smaller face. The unique inner face seal help to maintain a close and snug fit around the chin area which is generally regarded by experienced fit ...
The Autins face mask has washable and water-repellent ...
Description:
The Autins face mask has washable and water-repellent surface. The product can be disposed after use, or washed. Hand wash (or machine wash on delicate/wool cycle) with detergent up to 40 degrees maximum. Tumble dry low or drip dry. Discard ...
The Autins face mask can washable and it ...
Description:
The Autins face mask can washable and it has water-repellent surface. Product can be disposed after use, or washed. Hand wash (or machine wash on delicate/wool cycle) with detergent up to 40 degrees maximum. Tumble dry low or drip dry. ...
The 3M™ Secure Click™ HF-800-05 is a replacement ...
Description:
The 3M™ Secure Click™ HF-800-05 is a replacement part for speaking diaphragm for the HF-800 series respiratory half-face masks. HF-800-05 is easy to install, that can extend to the service life of respiratory protection. Replacement diaphragm assembly for 3M ™ ...