DLP DESIGN INC Reader, Writer 256 B RFID reader/writer, 50.8 → 101.6 mm

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

DLP-RFID1 - Reader/Writer

The DLP Design DLP-RFID1 is a USB-powered module for reading from and writing to ISO 15693, ISO 18000-3, and Tag-it™ intelligent RFID transponder tags. It excels at the ability to read and write up to 256b of data in addition to reading the unique identifier (UID/SID).

All operational power is taken from the host PC via the USB interface making it perfect for your application. All models are highly reliable and excellent quality.

RFID - DLP Design

Specifications
Attribute Value
Device Type Reader, Writer
Memory 256 B
Detection Range 50.8 → 101.6 mm
Communication Protocol RFID
Power Requirement Active
Length 5.1(OEM) mm, 21.1 (Retail) mm
Width 55.1(OEM) mm, 58.4 (Retail) mm
Depth 79.3 (OEM) mm, 82.6 (Retail) mm
Minimum Operating Temperature 0°C
Maximum Operating Temperature +70°C
Dimensions 5.1 x 55.1 x 79.3 (OEM) mm, 21.1 x 58.4 x 82.6 (Retail) mm
Discontinued product
Related Products
The Microscan 600mA 5VDC micro-sized bar code reader ...
Description:
The Microscan 600mA 5VDC micro-sized bar code reader comes with a corner-exit cable and high-density 15-pin connector. The ID-30 is a complete package for solving a barcode reading challenge under any condition. It has a 2GB non-volatile flash memory and ...
The Sick CLV60x 5VDC 1W bar code reader ...
Description:
The Sick CLV60x 5VDC 1W bar code reader comes with a centre-exit 2m 1x9-pin male connector. This CMOS line scanner sensor has a high scanning frequency of 750 Hz. This makes it is suitable for fast applications too. It has ...
The Telemecanique antenna is a panel mount smart ...
Description:
The Telemecanique antenna is a panel mount smart antenna. It operates under standalone mode and provides a discrete output signal with 300mA switching capacity. This product is compatible with RFID microchip Texas (Tag-it HFI), RFID microchip Fujitsu (MB89R118 -MB89R119) and ...
Telemecanique Sensors OsiSense XGRFID - Radio-frequency Identification - ...
Description:
Telemecanique Sensors OsiSense XGRFID - Radio-frequency Identification - can replace traditional bar-coding and electro-magnet tags as a method of product tracking. The OsiSense XG system operates at 13.65Mhz, and uses tag readers that are compatible with almost all tags conforming ...