Microchip Xplained Pro 20MHz Bluetooth, Wi-Fi Development Kit for WINC3400 for WINC3400-MR210CA Module

  • RS Stock No. 144-9441
  • Mfr. Part No. ATWINC3400-XPRO
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

The ATWINC3400-XPRO evaluation kit is a hardware platform to evaluate the WINC3400-MR210CA module. The WINC3400 is an IEEE 802.11 b/g/n/BLE4.0 IoT network controller SoC. It is the ideal add-on to existing MCU solutions bringing Wi-Fi and BLE Network capabilities through SPI-to-Wi-Fi interface. The WINC3400 connects to any PIC or SAM MCU with minimal resource requirements. The WINC3400's most advanced mode is a single stream 1x1 802.11n mode providing up to 72 Mbps PHY throughput. The WINC3400 features fully-integrated Power Amplifier, LNA, Switch and Power Management. It also features an on-chip microcontroller and integrated flash memory for system software with built in coexistence mechanism for concurrent Wi-Fi & BLE functionality. The only external clock source needed for the WINC3400 is a high-speed crystal or oscillator running at 26 MHz. The WINC3400 is available in a QFN package or as a fully certified module.

IEEE 802.11: IEEE 802.11 b/g/n 20MHz (1x1) solution
IEEE 802.11: Single spatial stream in 2.4GHz ISM band
IEEE 802.11: Integrated PA and T/R Switch
IEEE 802.11: Superior Sensitivity and Range via advanced PHY signal processing
IEEE 802.11: Operating temperature range of -40C to +85C
IEEE 802.11: On-Chip Network Stack to offload MCU
IEEE 802.11: Integrated Network IP stack to minimize host CPU requirements
IEEE 802.11: Network features: TCP, UDP, DHCP, ARP, HTTP, SSL, and DNS
Bluetooth: On-Chip Network Stack to offload MCU
Bluetooth: BLE 4.0
Bluetooth: Class 2 transmission
Bluetooth: Adaptive Frequency Hopping
Bluetooth: Integrated PA and T/R Switch
Bluetooth: Superior Sensitivity and Range

Specifications
Attribute Value
RF Technology Bluetooth, Wi-Fi
Kit Classification Development Kit
For Use With WINC3400-MR210CA Module
Featured Device WINC3400
Frequency 20MHz
Kit Name Xplained Pro
4 In stock for delivery within 4 working days
Price Each
Was SGD58.76
SGD 48.20
(exc. GST)
SGD 51.57
(inc. GST)
units
Per unit
1 +
SGD48.20
Related Products
MikroElektronika has designed a range of boards to ...
Description:
MikroElektronika has designed a range of boards to add new functions and enhance the development of your applications using the mikroBUS™ pinout standard socket. All in one click!Click™ boards can add a range of sensing, Bluetooth, Wi-Fi, extra memory, UART ...
The RF Digital RFD22125 Proto shield allows you ...
Description:
The RF Digital RFD22125 Proto shield allows you to build your own prototype shield for the RFduino. There is a free grid area to enable you to add your own circuits; it also lets you access the 3V supply rail ...
The Trenz electronic is an FPGA module integrating ...
Description:
The Trenz electronic is an FPGA module integrating a Xilinx Artix-7 100T FPGA, two 10/100 Mbit Ethernet PHYs, 512Mb DDR3 SDRAM with 8-bit width, 32Mb flash memory for configuration and operation. It has powerful switch-mode power supplies for all on-board ...
The Silicon Labs EFR32 Mighty Gecko SLWRB4150A Radio ...
Description:
The Silicon Labs EFR32 Mighty Gecko SLWRB4150A Radio Board supports dual-band operation thanks to the integrated sub-1GHz and 2.4GHz ISM band transceivers. It is designed to be used with a BRD4001A Mainboard that comes with the SLWSTK6000A Wireless Starter Kit, ...