Digi International XBee-PRO Wire Antenna 2.4GHz RF Transceiver Module for EM35x for Energy & Control Market

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TH
Product Details

Digi International XBEE-PRO RF Module

The Digi International XBee-PRO ZigBee RF module is high tech device that operates in the 2.4GHz ISM band allows the formation of a mesh network. The transceiver is built with the silicon labs EM357 system-on-chip microcontroller. This module is designed to operate within the ZigBee protocol and support the unique needs of low-cost, low-power wireless sensor networks. It provides cost-effective wireless connectivity to electronic devices. The design has improved power consumption that supports over-the-air firmware updates. It has a high power output and high receiver sensitivity. It can provide long-range line-of-sight communication for up to 3200m.

Features and Benefits

Programmable versions with on-board microprocessor enable custom ZigBee application development
Through-hole and surface mount form factors enable flexible design options
Firmware upgrades via UART, SPI or over the air (OTA)
Carrier frequency of 2.4GHz ISM band
RF power output of 18dBm
Receiver sensitivity of -102dBm
Interference control: direct sequence spread spectrum (DSSS), packet retry/ acknowledgement
OTA date rate up to 250kbps
Host communication: serial UART with RTS/CTS flow control, SPI
Programmable version contains an MC9S08QE32 microcontroller
Supported network topologies like point-to-point, point-to-multipoint, peer-to-peer and Mesh
Protocol: ZigBee PRO 2007, HA-Ready with support for binding/ multicasting
AES-128 encryption
10-bit four ADC channels
15 GPIO channels
Link budgets of 119dB
Industry-leading sleep current
Power supply from 2.1VDC to 3.6VDC
Operating temperature ranges between -40°C and 85°C

Applications

Embedded development
Home and building automation
M2M
Wireless sensor networks
Robotics
Internet of things

Certifications

ANSI/ESD S20.20:2014
BS EN 61340-5-1:200

Specifications
Attribute Value
RF Technology RF Transceiver
Kit Classification Module
For Use With Energy & Control Market
Featured Device EM35x
Frequency 2.4GHz
Kit Name XBee-PRO Wire Antenna
78 In stock for delivery within 4 working days
Price Each
SGD 45.46
(exc. GST)
SGD 48.64
(inc. GST)
units
Per unit
1 +
SGD45.46
Related Products
The Pmod WiFi provides wireless communication through a ...
Description:
The Pmod WiFi provides wireless communication through a Microchip MRF24WG0MA Wi-Fi™ radio transceiver module. • IEEE 802.11g-compliant 2.4GHz ISM band RF transceiver• OTA data rate: 2Mbps• Range: 400m (Line of sight)• Serialized unique MAC address• PCB antenna• Radio regulation ...
The BRD4161/62A Mighty Gecko Radio Boards support the ...
Description:
The BRD4161/62A Mighty Gecko Radio Boards support the development of Zigbee, Thread, Bluetooth Low-Energy and proprietary wireless applications. They are supported by the Simplicity Studio suite of development tools. • EFR32MG12 Cortex-M4F core SoC with 1MB Flash memory, 256KB RAM ...
The BRD4163A Mighty Gecko Dual-Band Radio Board supports ...
Description:
The BRD4163A Mighty Gecko Dual-Band Radio Board supports the development of Zigbee, Thread, Bluetooth Low-Energy and proprietary wireless applications. It is supported by the Simplicity Studio suite of development tools. • EFR32MG12 Cortex-M4F core SoC with 1MB Flash memory, 256KB ...
The ATWINC3400-XPRO evaluation kit is a hardware platform ...
Description:
The ATWINC3400-XPRO evaluation kit is a hardware platform to evaluate the WINC3400-MR210CA module. The WINC3400 is an IEEE 802.11 b/g/n/BLE4.0 IoT network controller SoC. It is the ideal add-on to existing MCU solutions bringing Wi-Fi and BLE Network capabilities through ...