RS Components
Our website uses cookies and similar technologies to provide you with a better service while searching or placing an order, for analytical purposes and to personalise our advertising to you.
 
MPN

Schneider Electric


6 Within 4 working day(s) (Global stock)
17 Within 5 working day(s) (Global stock)
Add to Basket

Price Each

SGD241.59

(exc. GST)

SGD258.50

(inc. GST)

units

Added

RS Stock No.:
609-9955
Mfr. Part No.:
XACA4713
Manufacturer:
Schneider Electric
COO (Country of Origin):
CZ
unitsPer unit
1 +SGD241.59

Standard Pushbutton


Created and designed for predominantly crane applications, Schneider Electrics push-button pendant station provides a covering case for the internal push button. This unit is a simple yet effective mechanical switch which is commonly used to control one function within a machine or device.


Common Applications of a Push Button Pendants Station


Pre assembled double insulated crane pendants for single speed motor applicationsMechanically interlocked between pairsFor light duty Pendant switch see also Stock no 507481


  • Pre-assembled, ready to go
  • Double insulated
  • Commonly used for single speed motor applications
  • Mechanically interlocked between pairs


Schneider Electric Push Button Pendant Station - XACA4713


Forming part of Schneider Electrics Harmony XAC range, this pendant features four push-buttons and one emergency stop button.


Features & Benefits


  • The control button type of the buttons are - third pushbutton 1 NO right - slow, stop pushbutton Ø 40 mm 1 NC - latching, second pushbutton 1 NO lower -slow, fourth pushbutton 1 NO left - slow and first pushbutton 1 NO raise - slow

  • With mechanical interlocking

  • Aesthetically pleasing, finished with bright yellow colour, making it easy to locate

  • Mechanically durable up to 1000000 cycles

  • The cable entry has a rubber sleeve with stepped entry, the cable outer diameter is 0.31...1.02 in (8...26 mm)

  • This pendant control station has a conventional enclosed thermal current of 10A

  • The unit features an ingress protection rating of IP65, this means that the pendant control station is rated as dust tight and is protected against water projected from a nozzle

  • Shock-resistant of 100gn conforming to EIC 60068-2-27

  • Features a rated insulation voltage of 600V (degree of pollution:3) which conforms to IEC 60947-1

  • The rated impulse withstand voltage is 6 kV which conforms to IEC 60947-1


Schneider Electric - Push Buttons

Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, 3A I th ;250Vdc, 0.27A I th ; 10A I th allowing electrical cross-interlocking if desired.

Environmental protection to IP65Fitted cable clamps and stepped cable entry bootsMechanical interlocking between each pair of opposing pushbutton actuatorsAdapters supplied for self-supporting pendant cable, with lug for chain support