RS Components
Our website uses cookies and similar technologies to provide you with a better service while searching or placing an order, for analytical purposes and to personalise our advertising to you.

Schneider Electric

30 Within 4 working day(s) (Global stock)
6 Within 5 working day(s) (Global stock)
Add to Basket

Price Each


(exc. GST)


(inc. GST)



RS Stock No.:
Mfr. Part No.:
Schneider Electric
COO (Country of Origin):
unitsPer unit
1 +SGD131.26

Pistol Grip

Pistol-grip pendant control stations for simple hoisting applications.

Common Applications of a Push Button Pendants Station

All opposing pairs of switches are mechanically interlockedSwitching current 10AIP65 ratedHoist and lowering functions only

  • The XACA series from Schneider has single and two-way speed versions
  • Double insulated
  • Shock and corrosive resistant
  • Ease of operation

Schneider Electric Pistol Grip Push Button Pendant Station -XACA2013

Forming part of the harmony XAC series, this pistol grip pendant station is brought to you complete and ready use - no need to set up. The pendant features one emergency stop button and two push buttons.

Features & Benefits

  • First pushbutton 1 NO raise, slow, second pushbutton 1 NO lower, slow and stop pushbutton Ø 30 mm 1 NC, latching

  • With mechanical interlocking

  • Aesthetically pleasing, finished with bright yellow colour, making it easy to locate

  • Mechanically durable up to 1000000 cycles

  • The cable entry has a rubber sleeve with stepped entry, the cable outer diameter is 7...15mm

  • This pendant control station has a conventional enclosed thermal current of 10A

  • Standards - CSA C22-2, No 14 EN/IEC, 60204-32 EN/IEC and 60947-5-1 UL 508

  • Certifications - CSA, UL

  • The unit features an ingress protection rating of IP65, this means that the pendant control station is rated as dust tight and is protected against water projected from a nozzle

  • Shock-resistant of 100gn conforming to EIC 60068-2-27

  • Features and rated insulation voltage of 600V (degree of pollution:3) which conforms to IEC 60947-1

  • The rated impulse withstand voltage is 6 kV which conforms to IEC 60947-1

Schneider Electric - Push Buttons

Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, 3A I th ;250Vdc, 0.27A I th ; 10A I th allowing electrical cross-interlocking if desired.

Environmental protection to IP65Fitted cable clamps and stepped cable entry bootsMechanical interlocking between each pair of opposing pushbutton actuatorsAdapters supplied for self-supporting pendant cable, with lug for chain support