Siemens Enclosed Push Button, IP65 64mm 85mm 85mm

  • RS Stock No. 742-9326
  • Mfr. Part No. 3SB3801-0DE3
  • Manufacturer Siemens
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Control Stations with Pushbutton - Plastic

The 3SB3 range of enclosures come with standard fittings. These control stations are grey plastic and are equipped with actuators and indicators made of plastic.

Plastic enclosure with an ingress protection of IP65
Vertical mounting type
Contact blocks for floor mounting (are snapped into the enclosure base)
Cable entry on the top and bottom 1 x M20 each
Mounting diameter 22mm

PHASE OUT NOTIFICATION

This product is in obsolescence mode and is due for discontinuation by the manufacturer. We recommend that you review the new pushbutton range SIRIUS ACT which is the alternative range proposed by the manufacturer. Please refer to the 3SB3 / SIRIUS ACT cross-reference guide located in the technical reference section.

Siemens

Specifications
Attribute Value
Push Button Material Plastic
IP Rating IP65
Length 85mm
Width 85mm
Depth 64mm
Terminal Type Screw
Maximum AC Voltage 230V
Maximum DC Voltage 24V
Maximum Current 3 A dc, 6 A ac
Discontinued product
Related Products
Siemens push button enclosures, part of the SIRIUS ...
Description:
Siemens push button enclosures, part of the SIRIUS ACT range. One-handed installation without special toolsComponents can be snapped on without having to hold the other sideInstallation possible in a slanted positionModular conceptStylish design & high-quality materialsExtremely Rugged & ReliableFlexible ...
Enclosure for command devices, 22 mm, round, Enclosure ...
Description:
Enclosure for command devices, 22 mm, round, Enclosure material plastic, enclosure top part gray, 2 control points plastic, Recess for labels, B=pushbutton white, label: I, 1 NO, screw terminal, A=pushbutton black label: O 1 NC, screw terminal, floor mounting,
Enclosure for command devices, 22 mm, round, Enclosure ...
Description:
Enclosure for command devices, 22 mm, round, Enclosure material plastic, enclosure top part gray, 1 control point plastic, Recess for label, A=pushbutton black label: O 1 NC, screw terminal, Floor mounting.
Green and red 22mm diameter, spring return double ...
Description:
Green and red 22mm diameter, spring return double insulated bezel push buttons Stop button fitted with 1 N/C contact block, start button fitted with 1 N/O contactI/O with red LED pilot light available ’STOP’ ’START’; version has marking on legend ...