Terasic P0024 GPIO to HSMC/HSTC Adapter Board

  • RS Stock No. 768-9048
  • Mfr. Part No. P0024
  • Manufacturer Terasic
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Terasic GPIO-HSTC Adapter Board

The HTG Card is designed to convert a High-Speed Terasic connector (HSTC) or a High-Speed Mezzanine connector (HSMC) I/Os to three 40-pin expansion prototype connectors, which are compatible with Altera DE3/DE2-115/DE2/DE1/DE0 expansion headers. Users can connect up to three Altera DE3/DE2-115/DE2/DE1/DE0 boards (or associated daughter cards) onto a HSTC/HSMC-interfaced host board via a HTG Card.

Convert HSTC/HSMC-interfaced I/O to standard 40-pin expansion connectors
Allow users to connect Altera DE3/DE2-115/DE2/DE1/DE0 boards to a HSTC/HSMC-interfaced host board
Provide test points for signal measurement

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Attribute Value
Kit Classification Adapter Board
3 In stock for delivery within 4 working days
Price Each
SGD 100.07
(exc. GST)
SGD 107.07
(inc. GST)
Per unit
1 +
Related Products
The NB6L72 is a high-bandwidth fully differential 2 ...
The NB6L72 is a high-bandwidth fully differential 2 x 2 clock or data Crosspoint Switch with internal source termination and LVPECL output structure, optimized for low skew and minimal jitter. The differential inputs incorporate internal 50-ohm termination resistors and will ...
The NB3N3020DTG is a high precision, low phase ...
The NB3N3020DTG is a high precision, low phase noise selectable clock multiplier. The device takes a 5 - 27 MHz fundamental mode parallel resonant crystal or a 2 - 210 MHz LVCMOS single ended clock source and generates a differential ...
The DC Motor 3 Click is an add-on board that drives Direct Current (DC) motors. A Pulse Width Modulation (PWM) Sensorless Controller IC (Toshiba TB6575FNG), controls the rotation speed. External motor power supply up to 30 V dc capable of ...
The STEVAL-IPM08B compact motor drive power board is ...
The STEVAL-IPM08B compact motor drive power board is based on SLLIMM™ (small low-loss intelligent molded module) 2nd series module ( STGIB8CH60TS-L). It provides an affordable and easy-to-use solution for driving high power motors in a wide range of applications such ...