Avnet AES-K7DSP-325T-G Xilinx Kintex-7 DSP Development Kit

  • RS Stock No. 768-6080
  • Mfr. Part No. AES-K7DSP-325T-G
  • Manufacturer Avnet
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Kintex 7 FPGA DSP Evaluation Kit

The Xilinx Kintex-7 from Avnet is an FPGA DSP development kit featuring high-speed analogue. It enables you to design, with your specific application in mind, right from the beginning.
This kit features two main parts; the Xilinx Kintex-7 FPGA KC705 based board and an FMC 150 daughter board. The Kintex-7 is a high performance board offering quick prototyping for serial connectivity applications and advanced memory interfacing. The integrated FMC daughter board enables you to interface with signals for your desired application.

Product applications
Wireless communications
Aerospace
Test and measurement
Medical imaging

What is included?
Xilinx KC705 Kintex-7 7K325T board
4DSP FMC150 High-Speed ADC/DAC FMC Module
12 V power supply
USB programming cable
Ethernet cable
Vivado ISE® Design Suite: System Edition
2 x MMCX RF coaxial cables
Reference design tutorials

Features and Benefits - Xilinx KC705 Development Board
FPGA: XC7K325T-2FFG900C
Onboard configuration circuitry
128 MB Parallel (BPI) Flash
256 MB Quad-SPI Flash
10/100/1000 Tri-Speed Ethernet
SFP+ transceiver connector
GTX port (TX, RX) with four SMA connectors
USB to UART Bridge
PCI Express x8 Edge Connector
DDR3 SO-DIMM (2 GB)
BPI Linear Flash (128 MB)
SDIO Interface
I2C EEPROM (1 Kb)
200 MHz oscillator (differential)
HDMI Output
12 V wall adapter or ATX

Features and Benefits - 4DSP FMC150 High-Speed ADC/DAC FMC Module
TI ADS62P49 dual 14-bit, 250 MSPS ADC
TI DAC3283 dual 16-bit, 800 MSPS, 2x/4x interpolation DAC
TI CDCE72010 clock synchronizer/jitter cleaner
External clock input option
50 Ohm, transformer-coupled analog I/O
External trigger input

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Specifications
Attribute Value
Programmable Logic Technology FPGA
Kit Classification Development Kit
Kit Name Xilinx Kintex-7 DSP
2 In stock for delivery within 3 working days
Price Each
SGD 7,270.68
(exc. GST)
SGD 7,779.63
(inc. GST)
units
Per unit
1 +
SGD7,270.68
Related Products
The YROTATE-IT-RX23T board with its RX23T microcontroller is ...
Description:
The YROTATE-IT-RX23T board with its RX23T microcontroller is capable of driving 3-phase permanent magnet AC motors up to 48Vdc with a peak current of 5A. It features an intuitive PC GUI to manage the motor speed, display the vector control ...
The ADuCM360/ADuCM361 is a low power fully integrated, ...
Description:
The ADuCM360/ADuCM361 is a low power fully integrated, 24-bit Data Acquisition System incorporating dual, high performance multi-channel sigma-delta (Σ-Δ) ADCs, ARM Cortex M3® Microcontroller, and Flash/EE memory on a single chip.The evaluation kit is designed for simplicity, flexibility and ease ...
The Arty Z7-20 is a development platform designed ...
Description:
The Arty Z7-20 is a development platform designed around the Xilinx Zynq-7000™ All Programmable System-on-Chip (AP SoC). The Zynq-7000 architecture integrates a dual-core, 650MHz ARM Cortex-A9 processor with Artix-7 series FPGA logic. This pairing surrounds a powerful processor with a ...
The Trenz electronic is a Raspberry Pi compatible ...
Description:
The Trenz electronic is a Raspberry Pi compatible SoC module integrating a Xilinx Zynq-7010, 512Mb DDR3L SDRAM, 4 USB ports, an Ethernet port and 16Mb flash memory for configuration and operation. It is used for industrial applications. • Audio plug ...