Right Angle 50Ω RF Adapter SMA Plug to SMA Socket 0 → 12.4GHz

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

TE Connectivity SMA Adapters with Passivate Finish

A range of In-Series SMA adapters with a passivated stainless steel finish.
SMA adapter stock number 713-1022 is jack to jack rear bulkhead feed through with epoxy captivation and a TFE fluorocarbon dielectric
SMA adapter stock number 718-2590 is jack to jack rear bulkhead feed through with a PTFE fluorocarbon dielectric and hermetic sealing
SMA adapter stock number 713-1029 is jack to jack front and rear bulkhead feed through with a fluoropolymer dielectric
SMA adapter stock number 713-1031 is a jack to plug right angle adapter with a TFE fluorocarbon dielectric
SMA adapter stock number 713-1038 is a jack to plug connector saver adapter with epoxy captivation and a TFE fluorocarbon dielectric
SMA adapter stock number 718-2594 is a right angle plug to plug adapter with a TFE fluorocarbon dielectric
SMA adapter stock number 745-5075 is a plug to plug adapter with epoxy captivation and a TFE fluorocarbon dielectric

Supplied with

Silicone rubber seal, lock washer and jam nut

TE Connectivity SMA Passivated Finish

Specifications
Attribute Value
Adapter Type SMA Plug to SMA Jack
Adapter Type A SMA
Adapter Type B SMA
Gender A Male
Gender B Female
Impedance 50Ω
Body Orientation Right Angle
Operating Frequency 0 → 12.4GHz
Contact Plating Gold over Copper
Length 12.7mm
Cable Type Coaxial
Contact Material Beryllium Copper
Temporarily out of stock - back order for despatch 17/03/2020, delivery within 3 working days from despatch date
Price Each
SGD 46.80
(exc. GST)
SGD 50.08
(inc. GST)
units
Per unit
1 - 14
SGD46.80
15 - 49
SGD45.87
50 - 99
SGD44.95
100 - 249
SGD43.60
250 +
SGD42.29
Related Products
M Series guide pins and sockets made from ...
Description:
M Series guide pins and sockets made from stainless steel. These guide pins and sockets are used for aligning connector halves during mating. Centre guide pins and sockets are used in housings that have a single mounting hole as well ...
The TA271 D9-BNC adaptor lets you use traditional ...
Description:
The TA271 D9-BNC adaptor lets you use traditional differential voltage probes and current probes, and make single-ended measurements with a ground-referenced probe. It is also essential when using the TA325 and TA326 current probes. The adaptor grounds the negative input ...
The TA299 is an optional accessory, and a ...
Description:
The TA299 is an optional accessory, and a useful adaptor to have in your kit. The D9 to dual BNC adaptor allows you to make differential measurements using two single-ended probes with BNC connectors or connect two BNC cables from ...
The DVI-A male to Female SVGA adapter from ...
Description:
The DVI-A male to Female SVGA adapter from our trusted and reliable own brand RS PRO provides an excellent conversion of DVI-A to an SVGA signal, allowing you to easily connect a DVI-A source to an SVGA monitor. This versatile ...