SEGGER 8.07.02 USB Isolator

  • RS Stock No. 131-1337
  • Mfr. Part No. 8.07.02 USB Isolator
  • Manufacturer SEGGER
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

J-Link USB Isolator Board

The J-Link USB Isolator may be connected in a J-Link Probe to Host PC USB link to provide electrical isolation. This is essential when development tools are not connected to the same ground as the application.

Compatible Probes

• All J-Link tools and production programmers that use USB

Features

• 3kV DC transformer isolation for 1sec
• Propagation delay: Maximum 70ns
• Maximum 200mA VBus current to J-Link Probe
• USB 2.0 FS capable
• Short-circuit protection
• Host connection: mini-USB
• J-Link connection: USB-A
• 2 x LEDs: VBus Power On and VBus Overload

Specifications
Attribute Value
For Use With J-Link Probes
4 In stock for delivery within 4 working days
Price Each
SGD 361.60
(exc. GST)
SGD 386.91
(inc. GST)
units
Per unit
1 +
SGD361.60
Related Products
These modules are MCU to USB host controller ...
Description:
These modules are MCU to USB host controller development modules for the Vinculum VNC1L device. They are supplied on a PCB designed to fit into 24-pin or 40-pin DIP sockets and provide access to the UART, parallel FIFO and SPI ...
The USB-COM-PLUS modules provide a simple method of ...
Description:
The USB-COM-PLUS modules provide a simple method of adapting legacy serial devices with RS-232, RS-422 or RS-485 interfaces to modern USB ports. The USB-COM232-PLUS1 module is a single channel USB to RS-232 communication device. Utilises the FTDI FT232RThe USB-COM232-PLUS2 module ...
The FTDI Chip TTL-232x USB to Serial UART ...
Description:
The FTDI Chip TTL-232x USB to Serial UART (TTL level) converter cables provide a simple and fast way to convert microcontroller UART serial I/O to USB. The TTL-232R contains a small circuit board which includes the FT232x chip. Encapsulated in ...
The Vinculo is a dual channel USB Host/Device ...
Description:
The Vinculo is a dual channel USB Host/Device Controller is targeted at rapid development and prototyping of USB Host/Device interfaces. An optional Vinculo prototyping board provides add-on expansion board support. The Vinculo features an 8-channel, 10Bit ADC, PWM interface and ...