SEGGER, embOS/IP Switch Board, 6.70.00

  • RS Stock No. 146-4390
  • Mfr. Part No. 6.70.00 embOS/IP Switch Board
  • Manufacturer SEGGER
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The embOS/IP Switch Board is intended to be mainly a demonstrator board for the Tail Tagging add-on of SEGGER's embedded IP stack embOS/IP. Micrel / Microchip has developed switches which can expand one physical port into 1+n ports, supported by the so-called Tail Tagging mode. This enhancement allows to establish multiple physical external ports when only one physical Ethernet port is available on the CPU - by choosing another PHY. The embOS/IP Switch Board provides a solid starting point for a project that requires multiple physical Ethernet ports by using SEGGER’s middleware products. SEGGER’s embOS real-time operating system is at the heart of the evaluation. Furthermore, an evaluation version of the TCP/IP stack embOS/IP (including web server demo and UPnP) enables full evaluation of multi interface solutions. The embOS/IP Switch Board also features a J-Link OB, an on-board version of SEGGER’s market-leading debug probe J-Link. There are three Ethernet ports that can be accessed individually by software although they share the same host interface by using the embOS/IP Tail Tagging add-on. Each of the Ethernet ports can have its own hardware address and identified by the network as individual host. The embOS/IP Switch Board is powered by USB only. Current consumption drawn strongly depends on the application and connected Ethernet links. Idle consumption is approx. 140 mA.

Layer 2 managed 4-port switch
3 10/100 Mbps copper ports + 1 10/100/1000 Mbps uplink port
Internal biasing, on-chip termination
Enhanced power management features incl. Energy Efficient Ethernet (EEE), PME, WoL
Programmable rate limiting and priority ratio
Tagged and port-based VLAN
Port based security and ACL-rule based packet filtering technology
QoS priority with four queues
High-performance memory bandwidth and a shared memory-based switch fabric with non-blocking support

Attribute Value
Kit Name EmbOS/IP Switch Board
3 In stock for delivery within 4 working days
Price Each
SGD 248.60
(exc. GST)
SGD 266.00
(inc. GST)
Per unit
1 +
Related Products
Connect with the Serial Device directly - Adding ...
Connect with the Serial Device directly - Adding Network Function Simply and Quickly - Providing Firmware CustomizationHigh System Stability and Reliability by using W7100 Hardware ChipSupports Serial Configuration &ndash with Simple and Easy commandSupports Password for the SecurityEasy & Powerful ...
The NCP333FCT2GEVB evaluation board is designed to test ...
The NCP333FCT2GEVB evaluation board is designed to test the NCP333, a low Ron MOSFET controlled by an external logic pin, allowing optimization of battery life, and portable device autonomy.
The NCP5181 is a High Voltage Power MOSFET ...
The NCP5181 is a High Voltage Power MOSFET Driver providing two outputs for direct drive of 2 N-channel power MOSFETs arranged in a half-bridge (or any other high-side + low-side) configuration. it uses the bootstrap technique to insure a proper ...
Evaluation board for supporting customers during their first ...
Evaluation board for supporting customers during their first steps of designing applications with CIPOS™ Mini PFC integrated IPM. The combination of this power board and matching iMOTION™ control board EVAL-M3-102T, based on the IMC102T-F064 iMOTION™ controller, creates a powerful inverter ...