ADAFRUIT GEMMA Wearable Starter Kit 1657

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Adafruit GEMMA Wearable Platform v2 Starter Pack

The starter pack includes everything you need to add a bit of LED sparkle to your clothing. It has a set of alligator clips to test your design and the conductive thread to sew into your clothing.

The GEMMA Starter Pack includes:

- Adafruit GEMMA V2 - Miniature wearable electronic platform (RS 124-5508)
- Four FLORA RGB NeoPixels V2
- 2 x 2032 coin cell battery holder with JST connector and On/Off switch (6 V output) (batteries not included) (RS 866-0672)
- Thin conductive stainless steel thread - 2 ply, 25 meter (85 feet)
- Needle set with 20 pieces
- Small alligator clip test leads (set of 12)
- USB cable – USB A to Micro B – 90 cm (3 feet)

Adafruit GEMMA Wearable Platform v2

GEMMA is a tiny wearable platform built on a round 1.1 inch (2.8 cm) diameter board. The microcontroller at the heart of GEMMA is the Atmel Attiny85 8-bit MCU and is programmable with an Arduino IDE over USB.

This, the second generation of GEMMA, is physically and code-wise identical to the original but now has a Micro-B USB connector and an On-Off switch. It was designed mainly for wearable applications but its small size and low cost makes it great for a wide range of portable projects.

The Attiny85 processor has 8K of flash and 5 I/O pins, including analogue inputs and PWM outputs. There is a USB bootloader available from Adafruit.com but although you can program GEMMA using the Arduino IDE, it is not fully 100% Arduino compatible.

Adafruit GEMMA Wearable Platform

Specifications
Attribute Value
Classification Starter Kit
Kit Name GEMMA
Technology Wearable
10 In stock for delivery within 3 working days
Price Each
SGD 41.32
(exc. GST)
SGD 44.21
(inc. GST)
units
Per unit
1 +
SGD41.32
Related Products
The PICkit™ Serial Analyzer is a USB-based tool ...
Description:
The PICkit™ Serial Analyzer is a USB-based tool used to direct communication between a PC and an external serial device Simplifies the chore of managing serial communication with a device under test. The Windows® GUI configures the hardware and ’scripts’ ...
The touch board starter kit from Bare Conductive ...
Description:
The touch board starter kit from Bare Conductive is a fantastic project kit for you to start experimenting with sensing applications. Perfect for all levels of capability, the starter kit comes with a comprehensive step-by-step guide and plenty of accessories ...
On-chip debugging emulator for Renesas Electronics microcontrollers (M16C, ...
Description:
On-chip debugging emulator for Renesas Electronics microcontrollers (M16C, H8, 740 family),Follow-on model from E8 Emulator. Real-time emulation possible with CPU operating at maximum frequencyAdequate break and trace functions installed for Tiny microcomputer system developmentSupport memory expansion mode ...
All these GSM/GPRS antennas support mobile communication with ...
Description:
All these GSM/GPRS antennas support mobile communication with your design applications and are compatible with the Arduino GSM Shield.DELTA 7 (761-7337)A quad band GSM/GPRS antenna that is ideal for machine to machine communication applications.ALPHA 1 (761-7346)A T bar GSM/GPRS antenna ...