RS PRO Process Pump Controller for Brushless Micropump Pump, 12 V

  • RS Stock No. 125-3570
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Brushless Micro Pump Controller

A compact and highly efficient motor controller for the RS Pro range of centrifugal micro-pumps.
The EQi controller accepts and input voltage of up to 30 volts and pump speed can be controlled from a potentiometer on the board or via a 0-5v external signal. With voltages above 12v the controller works to maintain a constant flow despite the increase in back pressure helping to provide a flatter flow – pressure curve.
Installation is easy, simply wire the two input terminals, attach the three outputs to the micro-pump and set the jumper position for on board speed control or control via an external 0-5v signal.

Applications

The EQi controller's compact dimensions, ease of installation and efficency make it suitable for a broad range of applicatiosn including
• Research and development
• Laboratory equipment
• Prototyping
• Production equipment

Specifications
Attribute Value
Compatible Pump Type Brushless Micropump
Supply Voltage 12 → 30 V dc
Connection 2 Screw Terminal (Input), 3 Screw Terminal (Output)
Maximum Fluid Temperature +80°C
Maximum Output Pressure 0.55bar
2 In stock for delivery within 4 working days
Price Each
Was SGD102.71
SGD 101.14
(exc. GST)
SGD 108.22
(inc. GST)
units
Per unit
1 +
SGD101.14
Related Products
These variable phase angle regulators are robust, compact ...
Description:
These variable phase angle regulators are robust, compact and enclosed units for 230V or 110V up to 15A single phase mains driven inductive loads, such as induction motors, fans & pumps. They give fully adjustable voltage outputs from zero to ...
Provide Safe Hot Swap for +3V to +12V ...
Description:
Provide Safe Hot Swap for +3V to +12V Power Supplies with Few External ComponentsUnique Current Regulation Architecture Minimizes n-FET Linear Mode DurationAutoretry Feature (MAX4272/MAX4273)DualSpeed/BiLevel Current Limit Protects Against Current Glitches and Short CircuitsPower-On RESET (MAX4273)15V Absolute ...
Accepts input from level probes and float switches ...
Description:
Accepts input from level probes and float switches to provide enhanced switching capabilitySupply voltage 12Vdc (max.)ABS case materialIngress protection to IP65 (subject to cable entry)Operating temperature range -10 to +50°CSwitching capacity: 5A at 240VacDimensions: H64 x W58 x D35mm.
Accepts any 4 to 20mA or HART compatible ...
Description:
Accepts any 4 to 20mA or HART compatible inputSupply voltage115/240Vac with Intrinsically safe 24Vdc power supply to the transmitterTwo voltage free contact closure inputsPre-programmed tank shapes, flow algorithms and pump control routinesTwenty-point set up facility for non-standard applications.Real time ...