Power Analyzer, up to 600V (RMS), up to

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CZ
Product Details

Rohde & Schwarz HMC8015 Power Quality Analyser

Rohde & Schwarz offer this large inclusion bundle of Power Quality Analyser, software upgrades and accessories.

HMC8015 is the first compact tester for AC/DC load and standby current characterisation to enable measurements without extra requirements such as computers or remote infrastructure. It features a numerical and graphical display with 26 key parameters. A PASS/FAIL function allows users to monitor numerous measurands either on the display panel or externally via an output on the rear panel. Simultaneously displaying up to 10 configurable measurands this bench analyser also has a refresh rate of 10 measurements per second. A hardware based integrator delivers a precise, seamless power consumption analysis adding up ampere hours and function according to polarity. Tailored specifically for use in labs and system racks this package is the ideal solution for all your bench testing needs.

Included in this bundle:

HMC8015 Power Quality Analyzer
HOC151 Advanced Analysis
HOC152 Advanced I/O
HOC153 Compliance Test

Features and Benefits:

• Clear display of all measured parameters
• Measurement accuracy
• Everyday measurement functions
• Power measurement range 50 μW to 12 kW
• Analog bandwidth DC to 100 kHz
• Sample rate 500 ks/s
• 16-bit resolution for voltage and current
• Basic accuracy 0.05%
• 26 different measurement and mathematical functions


CAN/CSA-C22.2 NO. 61010-1, UL 61010-1, DIN EN 61010-1, DIN EN 61326-1, DIN EN 55011

Attribute Value
Absolute Maximum Current Measurement 20A
Absolute Maximum Power Measurement 12kW
Maximum Voltage 600V
Best Voltage Measurement Accuracy 0.05 %
Best Current Measurement Accuracy 0.05 %
Display Type TFT
Measurement Type Current, Voltage
Interface Type Ethernet, USB
Power Source Mains
Width 280mm
Model Number p HMC8015
Dimensions 222 x 280 x 88mm
Weight 3.3kg
Maximum Frequency 100kHz
Height 88mm
Minimum Operating Temperature +5°C
Length 222mm
Maximum Operating Temperature +40°C
3 In stock for delivery within 5 working days
Price Each
Was SGD3,868.64
SGD 3,792.78
(exc. GST)
SGD 4,058.27
(inc. GST)
Per unit
1 +
Related Products
From RS PRO, this IPM242 clamp meter serves ...
From RS PRO, this IPM242 clamp meter serves as a first line of defence for spot checking and verifying system conditions before deploying more specialised tools. Featuring a full range of diagnostic capabilities including phase sequence, power & power factor, ...
The N6705C DC Power Analyzer provides unrivaled productivity ...
The N6705C DC Power Analyzer provides unrivaled productivity gains for sourcing and measuring DC voltage and current into the DUT (device under test) by integrating up to 4 advanced power supplies with DMM, Scope, Arb, and Data Logger features. The ...
The HM6050-2 line impedance stabilization network (LISN) is ...
The HM6050-2 line impedance stabilization network (LISN) is basically a filter network. Measurement of Line-conducted Interference within the Range from 9kHz…30MHz (CISPR 16)Selectable Transient LimiterArtificial Hand Connector A lowpass filter connects the DUT to the AC power lines.The LISN presents ...
The MPQ1000 handheld power quality analyzer has features ...
The MPQ1000 handheld power quality analyzer has features which make it ideal for troubleshooting, compliance testing and energy audits. Auto CT identification eliminates potential errors due to wrong CT range settings. The analyzer will automatically identify the CT and verify ...