Fluke I430-FLEXI-TF-II Power Quality Analyser Clamp, Accessory Type Flexible AC Current Probe

  • RS Stock No. 818-7357
  • Mfr. Part No. I430-FLEXI-TF-II
  • Manufacturer Fluke
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): RO
Product Details

i430-Flexi-TF-II 6000A Flexible AC Current Probe

The i430-Flexi-TF-II flexible AC current probe is optimized for current measurement on thick and hard to reach conductors. The i430-Flexi-TF-II is a flexible AC current probe for use with the Fluke 430 series Power Quality Analyzers including Series II.

Measuring range: 0.5 to 6000 A ac
Bandwidth (-3 dB): 10 Hz to 10 kHz
Output signal: 86.6 mV at 1000A/50Hz (on 1 MΩ), 85.0 mV at 1000A/50Hz (on 50 kΩ)
Maximum non-destructive current: 100 kA (50/60 Hz)
Transducer length: 610 mm (24 in)
Transducer diameter: 7.5 mm (0.3 in)
Minimum bending radius: 38 mm (1.5 in)
Cable length from transducer to BNC: 2.5 m (98.4 in)
Complies with: IEC 61010-1: Pollution degree 2, IEC 61010-2-032: 1000V CAT III/ 600V CAT IV, IEC 61010-031

Supplied with

Instruction Sheet

Fluke Flexible AC Current Probe

The Fluke flexible AC current probe has a current measuring range from 0.5A to 6000A. This lightweight measuring head allows quick and easy installation in hard to reach areas, without batteries or an external power source. It is also available as a pack of 4 pieces of the i430 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4 pack is perfect for use with 3-phase tools such as the Fluke 430 series.
Supplied with
Instruction Sheet

Features and Benefits

• Bandwidth (-3dB): 10Hz to 10kHz
• Output signal is 86.6mV at 1000A/50Hz (on 1 Mohm), 85.0mV at 1000A/50Hz (on 50kohm)
• Maximum non-destructive current is 100kA (50/60Hz)
• The transducer length is 610mm (24in)
• The transducer diameter is 7.5mm (0.3in)
• Minimum bending radius is 38mm (1.5in)
• Cable length from transducer to BNC: 2.5m (98.4in)

Certifications


IEC 61010-1: Pollution degree 2
• IEC 61010-2-032: 1000V CAT III/ 600V CAT IV safety rated
• IEC 61010-031
• UL94 approved
• IP41 rated
• CE
• CSA certified

Specifications
Attribute Value
Accessory Type Flexible AC Current Probe
For Use With Fluke 433/434/435/434-II/435-II/437-II
10 In stock for delivery within 3 working days
Price Each
SGD 845.00
(exc. GST)
SGD 904.15
(inc. GST)
units
Per unit
1 +
SGD845.00
Related Products
The Fluke i40s-EL Current Clamp-on Transformer is used ...
Description:
The Fluke i40s-EL Current Clamp-on Transformer is used for low current measurement, suitable for making measurements up to 40A and also measures accurately on 1A and 5A secondary current transformers. The i40s-EL jaw is capable of being clamped on current ...
The Fluke 17XX 24 inch iFlex flexible current ...
Description:
The Fluke 17XX 24 inch iFlex flexible current probes expand the measurement range of the Fluke 17XX Energy or Power Logger to 3000 A ac while providing the ultimate measurement flexibility. The iFlex probes connect directly to the logger, displaying ...
RS Pro IPM242 clamp meter serves as a ...
Description:
RS Pro IPM242 clamp meter serves as a first line of defence for spot checking and verifying system conditions before deploying more specialised tools. Featuring a full range of diagnostic capabilities including phase sequence, power & power factor, total harmonics ...
Portable hand held single phase power quality analyzer ...
Description:
Portable hand held single phase power quality analyzer ideal for maintenance, inspection and testing of electrical installations and electrical networks. It can be used for a snapshot of the main characteristics of a network and to track variations of the ...