ON Semiconductor NCP571SN10T1GEVB LDO Regulator Evaluation Board LDO Voltage Regulator for NCP571SN10T1G

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The demoboard supports the LDO regulator NCP571 with fix output voltage 1.0 V. An additional circuitry based on Single Input Buffer allows connect Enable signal with higher voltage than input voltage of LDO regulator up to 7 V. The ENABLE function allows turn the device to low consumption mode with quiescent current below 1 μA.Size: 38mm x 30mm x 18mm

Input Voltage Range from 2.7 V to 12 V (Limited to 5.5 V in case the Single Output Buffer is powered too.)
Low Quiescent Current, Typical 2.7 μA
Output Current up to 150 mA
Precision 3% at Ta = 25°C
Internal Thermal Shutdown Protection
NCV Prefix for Automotive and Other Applications Requiring Site and Control Changes
These are Pb-Free Devices
Battery Powered Instruments
Hand-Held Instruments
Camcorders and Cameras

Specifications
Attribute Value
Power Management Function LDO Voltage Regulator
Kit Classification Evaluation Board
For Use With LDO Regulator
Featured Device NCP571SN10T1G
Kit Name LDO Regulator Evaluation Board
8 In stock for delivery within 3 working days
Price Each
SGD 59.48
(exc. GST)
SGD 63.64
(inc. GST)
units
Per unit
1 +
SGD59.48
Related Products
The STKNX is a transceiver device for KNX ...
Description:
The STKNX is a transceiver device for KNX TP communication. The small package and few external components enable the very compact KNX nodes design.The simple interface to the μC allows easy replacement of physical layer discrete components implementations.The STKNX device ...
The NCP101X series integrates a fixed-frequency current-mode controller ...
Description:
The NCP101X series integrates a fixed-frequency current-mode controller and a 700 V voltage MOSFET. Housed in a PDIP7 package, the NCP101X offers everything needed to build a rugged and low-cost power supply, including soft-start, frequency jittering, short-circuit protection, skip-cycle, a ...
The LV58063MCGEVB is designed to quickly evaluate the ...
Description:
The LV58063MCGEVB is designed to quickly evaluate the LV58063MC, a 1ch step-down switching regulator. A 0.13Ω FET is incorporated on the upper side to achieve high-efficiency operation for large output current. Low-heat resistance and compact-package SOP8L (200mil) employed. Current mode ...
The NCP1034 is a high voltage PWM controller ...
Description:
The NCP1034 is a high voltage PWM controller designed for high performance synchronous Buck DC-DC applications. The NCP1034 drives a pair of external N-MOSFETs using a programmable switching frequency up to 500 kHz which allows flexibility to tune the operation ...