- RS Stock No.:
- 143-8572
- Mfr. Part No.:
- EV-VN7008AJ
- Manufacturer:
- STMicroelectronics
This product is currently unavailable to backorder.
Unfortunately, we don’t have this product in stock and it’s not available to backorder at this time.
Added
Price Each
SGD111.70
(exc. GST)
SGD121.75
(inc. GST)
Units | Per unit |
1 + | SGD111.70 |
- RS Stock No.:
- 143-8572
- Mfr. Part No.:
- EV-VN7008AJ
- Manufacturer:
- STMicroelectronics
Technical data sheets
Legislation and Compliance
Product Details
EV-VN7008AJ Automotive High-Side Driver Evaluation Board
The EV-VN7008AJ board features the VN7008AJ Smart high-side driver with CurrentSense feedback device designed for Automotive applications. An on-board set of components enables the user to directly connect the load, the power supply and a microcontroller without any additional design effort.
Operating voltage range: +4 to +28Vdc
Maximum output current: 96A (limited)
Very low standby current: 0.5μA
Drives +12V automotive grounded loads through a 3V/5V CMOS-compatible interface
Dedicated high precision proportional load current sensing
OFF-state open-load detection
Output short to Vcc detection
Undervoltage shutdown
Overvoltage clamp
Load current limitation
Self-limiting of fast thermal transients
Configurable latch-off on overtemperature or power limitation with Fault Reset pin
Loss of ground and loss of Vcc protection
Reverse battery protection with external components
Electrostatic discharge protection
Sockets/Pads for current-sensing resistor
Output via screw terminal connector
Dimensions: 25 x 41.5mm
Maximum output current: 96A (limited)
Very low standby current: 0.5μA
Drives +12V automotive grounded loads through a 3V/5V CMOS-compatible interface
Dedicated high precision proportional load current sensing
OFF-state open-load detection
Output short to Vcc detection
Undervoltage shutdown
Overvoltage clamp
Load current limitation
Self-limiting of fast thermal transients
Configurable latch-off on overtemperature or power limitation with Fault Reset pin
Loss of ground and loss of Vcc protection
Reverse battery protection with external components
Electrostatic discharge protection
Sockets/Pads for current-sensing resistor
Output via screw terminal connector
Dimensions: 25 x 41.5mm
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
Intelligent Power Switches, STMicroelectronics
Specifications
Attribute | Value |
---|---|
Power Management Function | MOSFET Driver |
Kit Classification | Evaluation Board |
Featured Device | VN7008AJ |