Intersil HIP2103-4DEMO1Z Half-Bridge Driver

  • RS Stock No. 121-5902
  • Mfr. Part No. HIP2103-4DEMO1Z
  • Manufacturer Intersil
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

HIP2103/HIP2104, 3-Phase, Half Bridge Motor Drivers, Intersil

The HIP2103-4DEMO1Z Demonstration Board, is a general purpose motor drive module with a microprocessor controller on-board. It uses a PIC microcontroller to control the HIP2103 and the HIP2104 half bridge drivers with six MOSFETs.
The HIP2103-4DEMO2Z Demonstration Board integrates the HIP2103 and the HIP2104 half bridge drivers which control six on-board MOSFETs configured as a 3-phase bridge. Two inputs per a phase are provided to control independently the high side driver and the low side driver.
The boards are designed for Full, or Half Bridge brushed DC motors and 3-phase brushless DC (BLDC) motor applications. It can be used in any application that requires any combination of three independent half bridges.

HIP2103-4DEMO1Z

MOSFET bridge supply voltage up to 60 V
3.3 V and 12 V LDO voltage regulators with dedicated enable pins (HIP2104)
Sleep mode quiescent current: 5 μA
Under Voltage-Lockout (UVLO): 4 V
3.3 V or 5 V CMOS compatible inputs with hysteresis
High current MOSFETs with integrated bootstrap diode

HIP2103-4DEMO2Z

MOSFET bridge supply voltage from 5 V to 40 V dc
High current MOSFETs on-board with integrated bootstrap diode
Large diameter holes for wire connections to motor and power source
12-pin through-hole header for signal connections to an external controller
Optional heatsink can be accommodated on the PCB back-side

Motor Controllers & Drivers, Intersil

Specifications
Attribute Value
Power Management Function Half-Bridge Driver
Kit Classification Demonstration Board
2 In stock for delivery within 3 working days
Price Each
SGD 110.49
(exc. GST)
SGD 118.22
(inc. GST)
units
Per unit
1 +
SGD110.49
Related Products
The USB2.0 Hi-Speed to MPSSE SPI Module, VA800A-SPI, ...
Description:
The USB2.0 Hi-Speed to MPSSE SPI Module, VA800A-SPI, is a small electronic circuit board, utilising the FTDI FT232H. The 10 pin connector on the module fits directly to the FTDI VM800B and VM800C graphic display modules. This allows direct control ...
xChips are a rapid electronics development ecosystem to ...
Description:
xChips are a rapid electronics development ecosystem to help reduce development time and simplify making custom products as well as aiding learning. Without soldering, wiring, breadboarding, or hardware knowledge you can assemble a circuit in minutes, and concentrate on coding.xChips ...
The Click accessory modules plug into the MikroBUS ...
Description:
The Click accessory modules plug into the MikroBUS sockets in MikroElektronika microcontroller development boards. DC MOTOR click provides full H-Bridge control for a small DC motor. DRV8833RTY H-Bridge motor driver chipSpeed controlled by PWM signalTwo signals provide direction and brake/coast ...
The ISL8117, ISL8117A, are a synchronous Step down ...
Description:
The ISL8117, ISL8117A, are a synchronous Step down PWM (Pulse Width Modulation) Controllers that generate POL (Point-of-Load) voltage rails and bias voltage rails. The ISL8117A provides external configuration of the voltage loop compensation. Wide Power Supply from 4.5 V to ...