- RS Stock No.:
- 196-4471
- Mfr. Part No.:
- MHK2-12D
- Manufacturer:
- SMC
- RS Stock No.:
- 196-4471
- Mfr. Part No.:
- MHK2-12D
- Manufacturer:
- SMC
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- JP
Product Details
The MHK2 series parallel gripper was designed to accommodate applications that require a high degree of accuracy in a wide range of environments. The finger action accuracy is accomplished through the use of a wedge cam mechanism, which allows repeat ability to +/-0.01mm and yields much higher axial load characteristics which permits use in insert press procedures. The gripper body is enhanced by a rear centering hole +/-0.1mm and two location pin holes with H9 tolerance. The MHK2 gripper is standard with a dust cover for protection against direct exposure to harsh environments (available in Chloroprene, Flouro, and Silicone Rubber) and has optional stainless steel fingers.
Specifications
Attribute | Value |
---|---|
Number of Fingers | 2 |
Gripping Type | Parallel |
Action | Double |
Manufacturer Series | MHK2 |
Maximum Operating Pressure | 0.6 MPa |
Port Connection | M3 x 0.5 |
Weight | 75g |
Size Type | Standard |