Eaton Easy 800 Series PLC I/O Module 12 Inputs, 6 Outputs 20.4 → 28.8 V dc, 90 x 107.5 x 72 mm

  • RS Stock No. 443-0146
  • Mfr. Part No. EASY819-DC-RC
  • Manufacturer Eaton
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Easy 800

The Easy 800 intelligent relays offer a wide set of features and much greater functionality than the standard intelligent relay. Networking capability enables systems up to 300 I/O to be controlled using distributed intelligence architecture. For short runs this is simply achieved using RJ45 patch leads (e.g. stock no. 504-3232 etc) and end of line terminations stock no. 479-6418. To achieve the maximum network length of 1km, suitably wired premises would be required. The network can be configured with a program on one controller and all others acting as slaves, or with individual programs on each controller using results from the actions of other controllers (the I/O status of all controllers is visible to all others on the network). Four types have a separate 10 bit, 0-10V analogue output.Direct interface to the MFD display or X-system touch screen HMI systems enables operators to be kept informed.Internal features include, 256 lines of control circuit, PID function, stepper motor control, arithmetic function, Encoder input, PWM output, Serial output, and many other advanced functions.

Local expansion using the Easy i/o expansion units.
Network up to 8 units over 1000m
High level network interfaces for: Profibus, CanOpen, DeviceNet, Ethernet.
Programmable using drag and drop PC software
PID for temperature or process control
Stepper motor function for positioning applications
PWM output for heating applications
Serial output for modem and txt applications
Real time clock
Operating temperature range: -25 to 55°C

Eaton Easy 200, 400, 500, 700 and 800

Two or four inputs on dc and 24Vac powered versions can be configured as 10 bit, 0-10V analogue
Two 1kHz counter inputs on dc powered versions of the 500 and 700, (four 3/5kHz inputs on the 800)
Available as lower cost versions without display or panel keys (part numbers ending in X), for applications where no user interaction is required, and where the unit will be programmed using software which is available separately
Units with displays and panel keys can be programmed directly, or by using the software noted above, they can also display user configured messages (16 on the 500 and 700, and 32 on the 800) which include variable data fields.
16 multi-function timers, 16 up/down counters, (32 of each on the 800) and four retentive process run hour counters
Can be combined with MFD-Titan displays/controllers
Dimensions: H 90mm x W 71.5mm x D 58mm (easy500); H 90mm x W 71.5mm x D 58mm (easy 700//800)

The easy family of logic controllers is available with a choice features and options making it suitable for a wide variety of applications including small to medium sized machine automation, HVAC, lighting and access control within buildings. The easy500 and 700 are enhanced versions of the easy 400 and 600. They offer many new features while retaining full backward compatibility and are available with 12Vdc, 24Vdc, 24Vac and 100-240Vac power supply/input voltage options for maximum user flexibility.
Digital I/O expansion and AS-i or Profibus DP network modules are available for easy600, 700, 800 and MFD-Titan controllers. However, as there is only one connector at the right hand end of the controller, only one of these options may be implemented. This limitation does not extend to the easy-NET facility on the easy800 which is a completely separate feature, with it’s own dedicated RJ45 connectors on the top of the controller. In other words, easy800 controllers can have their I/O expanded whilst also being networked with up to eight other easy800 or MFD-Titan controllers via the built in easy-NET facility.

Note

(Figures in brackets in Onboard I/O and Outputs columns are for Transistor output types)

Specifications
Attribute Value
Manufacturer Series Easy 800 Series
Number of Inputs 12
Number of Outputs 6
Input Type Digital
Output Type Relay
For Use With Easy 800 Series, Easy 819
Number of I/O 18
Voltage Category 20.4 → 28.8 V dc
Length 90mm
Width 107.5mm
Depth 72mm
Dimensions 90 x 107.5 x 72 mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +55°C
4 In stock for delivery within 3 working days
Price Each
SGD 518.88
(exc. GST)
SGD 555.20
(inc. GST)
units
Per unit
1 +
SGD518.88
Related Products
Omron ZEN logic modules provide relays, timers, counters, ...
Description:
Omron ZEN logic modules provide relays, timers, counters, and time switches all in one unit. Ladder programming is possible using the built-in LCD display and eight operation buttons. Control up to 20 Inputs/Outputs Featuring a real-time clock, an LCD screen ...
The SIMATIC IOT2000 IO Arduino based shield module ...
Description:
The SIMATIC IOT2000 IO Arduino based shield module from Siemens enables local IO connectivity for IOT gateway. The IOT2000 IO module with its digital and analogue IO’s is designed to connecting directly local sensors and triggering uncritical processes. The IOT2000 ...
The S7 brings to the user a powerful ...
Description:
The S7 brings to the user a powerful solution to a host of control applications, which is easy to adapt and expand the system. The S7 is a family of PLCs which allows the user to tailor their selection of ...
Expansion modules and accessories to support the Siemens ...
Description:
Expansion modules and accessories to support the Siemens S7-300 PLC range. Each S7-313 PLC CPU Base Unit may be expanded with up to 8 expansion modules. S7-314 CPU Base Units can accept a total of 4 expansion racks consisting of ...