Mitsubishi PLC Expansion Module Power Supply 8 → 64 Input, 8 → 64 Output 100 → 240 V ac, 24 V dc

  • RS Stock No. 611-9554
  • Mfr. Part No. FX2N-8EYR-ES/UL
  • Manufacturer Mitsubishi
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): JP
Product Details

Digital Expansion Blocks

These are available in 8 or 16 input or output point sizes. They attach directly to the right hand end of the Base Unit or Expansion Unit (see Digital Expansion Units below) which also provides them with power. Input blocks are opto-isolated, 24Vdc sink or source selectable to suit NPN or PNP sensors, and output blocks are available with relay or transistor outputs. The number of blocks that may be added depends on a number of factors. However, as a guide, with the FX1N, blocks up to 32 I/O can be added. Further expansion (of FX1N and FX2N) is achieved by adding an Expansion Unit (see 2 below), which in turn can be further expanded by adding more Expansion Blocks. With the FX2N, the number of I/O that can be added depends on the size of the Base Unit. For 16 and 32 I/O FX2N base units and 32 I/O Expansion units, up to 32 inputs, or 24 outputs, or (for example) 24 inputs and 8 outputs can be added. For larger Base and Expansion Units, up to 64 inputs, or 48 outputs, or (for example) 32 inputs and 24 outputs can be added. For full configuration details and limitations, please refer to the FX1N and FX2N Hardware Manuals.

Mitsubishi Expansion Module

The Mitsubishi expansion module is designed to be used with the FX3U series. It is available in 8 input and output point sizes. This module can be attached directly to the right-hand end of the base unit or expansion unit, which also provides it with power. Input blocks are opto-isolated or source selectable to suit NPN or PNP sensors and output blocks are available with a relay or transistor outputs.

Features and Benefits

• Available communication protocols are RS-232, RS-422, RS-485, USB
• DIN rail mounting type
• Operating voltage ranges between 100VAC and 240VAC
• These outputs do not require a separate power supply as they are supplied via the basic device bus
• Relay/Transistor output

Applications


Industrial automation
• Robotics
• Automobiles industry

Certifications


UL approved
• cUL approved
•CE

Additional Modules for Mitsubishi FX1S, FX1N & FX2N PLC's

Products in this range are for use with FX1S, FX1N and FX2N PLC, unless specified otherwise. All are DIN rail mount and are 90mm high and 87mm deep. The width varies and is tabled below.

All of the following products, except the Extension Cable, attach directly to the right hand end of the previous unit, block or module using the short integral lead.

Specifications
Attribute Value
For Use With FX3U Series
Module Type Power Supply
Output Type Digital, Relay, Transistor
Number of Inputs 8 → 64
Number of Outputs 8 → 64
Voltage Category 24 V dc, 100 → 240 V ac
Memory Available Yes
Length 90mm
Width 350mm
Depth 87mm
Dimensions 90 x 350 x 87 mm
9 In stock for delivery within 3 working days
Price Each
SGD 205.69
(exc. GST)
SGD 220.09
(inc. GST)
units
Per unit
1 +
SGD205.69
Related Products
The mini power supply devices designed into the ...
Description:
The mini power supply devices designed into the LOGO!8 module offer great performance in the smallest space: The excellent efficiency over the complete load range and the low performance loss during idle times guarantee efficient operation. The power supply has ...
The CP-Series, part of the DIMENSION power supply ...
Description:
The CP-Series, part of the DIMENSION power supply family are cost optimized without compromising quality, reliability and performance. The CP10.241-R2 units include a decoupling MOSFET for building 1+1 or n+1 redundant power supply systems without the need of external redundancy ...
The single-phase PSU100Ds range from Siemens are switch ...
Description:
The single-phase PSU100Ds range from Siemens are switch mode power supplies designed for direct wall mounting. The rugged aluminium enclosure can be mounted in different positions via the screw mounting and can be used in applications with high temperature, high ...
Range of metal framed power supplies which covers ...
Description:
Range of metal framed power supplies which covers 15W, 35W, 50W, 100W, 150W and 350W and all are available with 5, 12 or 24VDC output voltages. The S8JC-ZS Switch mode, bottom-mounted power supply is a covered type, terminal block. S8JC- ...