Teledyne LeCroy ZD200 Oscilloscope Probe, Probe Type: Active, Differential 200MHz 60V 1:1

Technical data sheets
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): US
Product Details

Teledyne LeCroy oscilloscope probes

The Teledyne LeCroy oscilloscope probe offers a wide dynamic range of ±20V and a common-mode range of ±60V to allow a broad application use. The probe sensitivity and offset are automatically optimized based on the oscilloscope gain settings, so control is transparent to the user. When used with a LeCroy digital oscilloscope, no external power supply is required. Differential probes measure the difference in voltage of a test point with another test point.
Supplied with:
Adapted probe leads and tips
Instruction manual
Certificate of calibration
Supplied with:
Y lead set
6x straight tip
2x hook clip
2x micro IC clips
2x Micrograbber
2x extension lead (5cm)
2x extension lead (10cm)
2x dual-pin set (12.8mm)
2x dual-pin set (16.8mm)
Instruction manual
Certificate of calibration

Features and Benefits

Bandwidth is DC to 200MHz
Attenuation ratio is 1:1
Input impedance is 1Mohmll 3.5pF
Input differential range ±20V
Common Mode Range is ±60V
CMRR (typical) is 80dB at 60Hz and 50dB at 10MHz
It provide the best signal fidelity and minimize peaking and other undesirable effects often introduced with probe tips and leads
Complete accessory kit consisting of 3 seta of grabbers, one alligator clip, 2 sets of leads and 2 tip option for probing a variety of test points
Risetime 10–90% (Typical): 1.75ns

Applications

Automotive development
Failure analysis

Specifications
Attribute Value
Probe Type Active, Differential
Attenuation 1:1
Bandwidth 200MHz
Maximum Common Mode Input Voltage 60V
Model Number p ZD200
Series ZD
Rise Time 1.75ns
Temporarily out of stock - back order for despatch 26/10/2020, delivery within 5 working days from despatch date
Price Each
Was SGD3,795.27
SGD 3,576.62
(exc. GST)
SGD 3,826.98
(inc. GST)
units
Per unit
1 +
SGD3,576.62
Related Products
General purpose probes designed for optimal performance with ...
Description:
General purpose probes designed for optimal performance with oscilloscopes. They feature a durable cable and a solid stainless steel probe body encased with a hard, fracture-resistant plastic. General purpose retractable hook tip - hooks onto wires and test points for ...
Passive probes are standard accessories for Rohde & ...
Description:
Passive probes are standard accessories for Rohde & Schwarz oscilloscopes. They automatically detect the attenuation factor, and their springloaded tips make them precise to use. Passive probe 1:1 (10MHz) 10:1 (300MHz) - RT-ZP03 RS 144-8208Passive probe 10:1 (500MHz) double pack ...
The Digilent BNC terminated oscilloscope probe is perfect ...
Description:
The Digilent BNC terminated oscilloscope probe is perfect to use with the Analogue Discovery™ in conjunction with the Discovery BNC adapter. Bandwidth for 1x DC to 6MHz and 10x DC to 100MHz Selectable 1X/10X input attenuationInput resistance is 1x1Mohm and10x10MohmInput ...
The Rohde & Schwarz RT-ZD 1.5GHz differential broadband ...
Description:
The Rohde & Schwarz RT-ZD 1.5GHz differential broadband probes has a flat frequency response and a high input impedance with low input capacitance permit precise measurements on differential signals while keeping the loading on the DUT low. High common mode ...