- RS Stock No.:
- 174-4132
- Mfr. Part No.:
- HCPL-2232-500E
- Manufacturer:
- Broadcom
Discontinued product
Alternative
This product is not currently available. Here is our alternative recommendation.
- RS Stock No.:
- 174-4132
- Mfr. Part No.:
- HCPL-2232-500E
- Manufacturer:
- Broadcom
Technical data sheets
Legislation and Compliance
Product Details
The Broadcom dual-channel HCPL-2232 optocoupler is an optically-coupled logic gate. It contains an GaAsP LED. The detectors have totem pole output stages and optical receiver input stages with built-in Schmitt triggers to provide logic-compatible waveforms, eliminating the need for additional wave shaping.
10 kV/us Minimum Common Mode Rejection (CMR) at Vcm = 1000 V
Wide Operating VCC Range: 4.5 to 20 Volts
300 ns Propagation Delay Guaranteed over the Full Temperature Range
5 Mbd Typical Signal Rate
Low Input Current (1.6 mA to 1.8 mA)
Hysteresis
Totem Pole Output (No Pull-up Resistor Required)
Available in 8-Pin DIP, SOIC-8, Wide body Packages
Guaranteed Performance from -40 degrees C to 85 degrees C
Wide Operating VCC Range: 4.5 to 20 Volts
300 ns Propagation Delay Guaranteed over the Full Temperature Range
5 Mbd Typical Signal Rate
Low Input Current (1.6 mA to 1.8 mA)
Hysteresis
Totem Pole Output (No Pull-up Resistor Required)
Available in 8-Pin DIP, SOIC-8, Wide body Packages
Guaranteed Performance from -40 degrees C to 85 degrees C
Specifications
Attribute | Value |
---|---|
Mounting Type | Surface Mount |
Output Device | Schmitt Trigger |
Maximum Forward Voltage | 1.95V |
Number of Channels | 2 |
Number of Pins | 8 |
Package Type | DIP |
Input Current Type | DC |
Typical Rise Time | 30ns |
Maximum Input Current | 40 mA |
Isolation Voltage | 3750 Vrms |
Logic Output | Yes |
Typical Fall Time | 7ns |
Series | HCPL-2232 |