CLC4011ISO14MTR EXAR,, Op Amp, RRIO, 2.5MHz, 2.5 → 5.5 V, 14-Pin SOIC

  • RS Stock No. 146-1853
  • Mfr. Part No. CLC4011ISO14MTR
  • Manufacturer EXAR
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

CLC2011 and CLC4011 Rail-to-Rail I/O Amplifiers, EXAR

This COMLINEAR® range of low power voltage feedback amplifiers from Exar are high bipolar performance devices.
Designed for use with 2.5 V to 5.5 V power supplies, they are also suitable for use in battery-powered communication systems. This is down to their low power, high bandwidth and rail-to-rail performance.
The CLC2011 (dual) and CLC4011 (quad) voltage feedback amplifiers offer a small signal bandwidth or 4.9 MHz and a 5.3 V/μs slew rate.
Suitable applications for the CLC2011 and CLC4011 amplifiers include; portable devices, mobile communications, active filters and medical equipment.

Features of the CLC2011/CLC4011 COMLINEAR® amplifiers:
4.9 MHz bandwidth
Output voltage: within 20 mV of either rail
Input voltage: exceeds the rail by >250mV
5.3 V/μs slew rate
136μA supply current
16 mA output current
Fully specified at 2.7 V and 5 V supplies

CLC2011 - dual
CLC4011 - quad

Operational Amplifiers, EXAR

Specifications
Attribute Value
Mounting Type Surface Mount
Package Type SOIC
Power Supply Type Dual, Single
Number of Channels per Chip 4
Pin Count 14
Typical Single Supply Voltage 2.5 → 5.5 V
Typical Gain Bandwidth Product 2.5MHz
Typical Dual Supply Voltage ±1.25 → ±2.75V
Typical Slew Rate 9V/µs
Maximum Operating Frequency 10 kHz
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Typical Input Voltage Noise Density 22nV/√Hz
Rail to Rail Rail to Rail Input/Output
Dimensions 8.74 x 3.99 x 1.48mm
Length 8.74mm
Height 1.48mm
Width 3.99mm
Temporarily out of stock - back order for despatch when stock is available
Price Each (On a Reel of 250)
SGD 0.956
(exc. GST)
SGD 1.023
(inc. GST)
units
Per unit
Per Reel*
250 +
SGD0.956
SGD239.00
*price indicative
Related Products
Intersil Operational Amplifiers are among high-performance amplifier ICs ...
Description:
Intersil Operational Amplifiers are among high-performance amplifier ICs in the industry. Low input offset voltage: 40 μV, Max.Low offset drift: 150 nV/°C, Max.Input bias current: 250 pA, Max.Quiescent current: 20 μA, Typical per amplifierSingle supply range: +1.8 V to +5.5 ...
The TS921 (Single), The TS922 (Dual), TS924 (Quad) ...
Description:
The TS921 (Single), The TS922 (Dual), TS924 (Quad) and TS925 (Quad) BiCMOS operational amplifiers are optimised and fully specified for 3 V and 5 V operation. Rail-to-Rail input and outputLow noise: 9 nV/√HzLow Distortion 0.005%High output current: 80 mA (able ...
The TSV52x and TSV52xA operational amplifiers offer an ...
Description:
The TSV52x and TSV52xA operational amplifiers offer an outstanding Speed/Power consumption ratio. Gain bandwidth product: 1.15 MHz (5 V)Low power consumption: 45 μA (5 V)Rail-to-Rail input and outputLow input bias current: 1 pALow offset voltage: 800 μV max.Power supply operation ...
Intersil Operational Amplifiers are among high-performance amplifier ICs ...
Description:
Intersil Operational Amplifiers are among high-performance amplifier ICs in the industry. Low input offset voltage: 40 μV, Max.Low offset drift: 150 nV/°C, Max.Input bias current: 250 pA, Max.Quiescent current: 20 μA, Typical per amplifierSingle supply range: +1.8 V to +5.5 ...