Non-Isolated DC-DC Converter, 5V dc Output, 6A

  • RS Stock No. 135-9162P
  • Mfr. Part No. MYMGK00506ERSR
  • Manufacturer Murata
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Murata Mono Block 6A DC-DC Converter

The MYMGK***06 series are miniature Mono Block type non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measures only 9.0 x 7.5 x 5.0 mm. Applications include powering FPGA/CPU’s, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable logic and mixed voltage systems. The converters have input voltage ranges of 4.5 to 5.5 V dc(*FRSR) or 8.0 to 14 V dc(*ERSR) and a maximum output current of 6 Amps. Based on a fixed frequency synchronous buck converter switching topology, this high power conversion efficient PoL module features programmable output voltage 0.7to1.8 V dc(*FRSR) or 0.7 to 5.0 V dc(*ERSR), On/Off control and Power Good signal output. These converters also include under voltage lock out (UVLO), output short circuit protection and over-current protection.

Features and Benefits

• Programmable output voltage from 0.7-1.8 V dc
• Up to 6 Amps of output current
• Quick response to load change
• Ultra-small surface mount package
• 9.0 x 7.5 x 5.0 mm
• Outstanding thermal derating performance
• Overcurrent protection
• On/Off control (Positive logic)
• Power Good signal
• RoHS-6 hazardous substance compliance
• High Reliability / Heat Shock Testing
• 700 cycle (-40 to +125 °C)

Specifications
Attribute Value
Input Voltage Range 8 → 14 V dc
Input Voltage Nominal 12 V dc
Output Voltage 5V dc
Output Current 6A
Power Rating 30W
Mounting Type Surface Mount
Number of Outputs 1
Length 9mm
Width 7.5mm
Depth 5mm
Efficiency 95%
Minimum Temperature -40°C
Maximum Temperature +85°C
MTBF 2500000h
Power Signal Conversion Type DC-DC
Standards Met CSA-C22.2 No. 60950-1, EN 60950, IEC, IEC/EN 60950-1, UL, UL 60950-1
Series MGK
Load Regulation ±1%
Line Regulation ±1%
Maximum Input Current 2.6 (Full Load) A, 24 (No Load) mA
Protection Features Current Limit, Over Voltage Protection, Short Circuit Protection, Under Voltage Protection
Weight 1.2g
Ripple And Noise 0.7mV Pk-Pk
354 In stock for delivery within 3 working days
Price Each (Supplied on a Reel) Quantities below 150 on continuous strip
SGD 18.04
(exc. GST)
SGD 19.30
(inc. GST)
units
Per unit
5 - 9
SGD18.04
10 - 24
SGD17.07
25 +
SGD16.13
Packaging Options:
Related Products
The IEU series from XP Power offers a ...
Description:
The IEU series from XP Power offers a highly reliable range of single and dual outputs isolated DC-DC converters. The range features 1000 VDC in isolation and is available in an industry standard SIP or DIP package. These compact DC-DC ...
From Cosel, the ZUS series of isolated DC-DC ...
Description:
From Cosel, the ZUS series of isolated DC-DC converters are low cost, high profile and designed with an ultra thin profile. With a field failure rate of less than 0.012%, these DC-DC converters are high quality and highly reliable. The ...
Unregulated outputs1kVdc isolationEfficiency at full load up to ...
Description:
Unregulated outputs1kVdc isolationEfficiency at full load up to 85%Short circuit protectionFully encapsulated UL94V-0 packageSIP4 industry standard pinout.
The TRA-3 Series is a family of 3W ...
Description:
The TRA-3 Series is a family of 3W single/dual output semi-regulated DC/DC converters with a miniature design and input/output isolation. These Traco Power semi-regulated DC/DC converters are ideal for use within power drivers and circuits where unregulated DC/DC converters do ...