2 Pole Panel Mount Non Fused Isolator Switch, 2NO+2NC, 160 A

  • RS Stock No. 841-2650
  • Mfr. Part No. 1SCA125840R1001
  • Manufacturer ABB
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Switch Disconnectors for Photovoltaic Systems

The ABB OTDC series switch-disconnectors are expertly designed for PV applications and are most commonly used to isolate single strings or arrays of solar panels and battery banks. The switch disconnectors can also act as the main switch for the entire photovoltaic application.

Compact size
Unique safety features
Simple and quick installation
Safe and reliable

OTDC 16…32 Amperes

OTDC from 16…32 Amperes have numerous DC ratings within the same footprint space and the rated operational voltage can be scaled up to 1000 V to suit your application. Tunnel terminals capture fine stranded wires and they are wide enough to allow wires up to 16 mm and short circuit bars are preinstalled as standard.

OTDC 100...250

OTDC switches from 100…250 Amperes are the only 2-pole solution in the market with an operational voltage of 1000 VDC. This is possible thanks to carefully optimized arc plates and dual magnetic breaking.The switches are symmetrical in design and connections are independent of polarity, meaning they can work in both ways.

The OT range of switch disconnectors are suitable for use in a variety of applications including motor control centres, switchboards and as main switches in machines.

Attribute Value
Number of Poles 2
Maximum Current 160 A
Mounting Type Panel Mount
Normal State Configuration 2NO+2NC
Voltage Rating 1 kV dc
Length 113mm
Width 176mm
Depth 73.5mm
Minimum Operating Temperature -20°C
Terminal Type Lug
Maximum Operating Temperature +50°C
Throw Configuration Single
1 In stock for delivery within 4 working days
Price Each
SGD 578.51
(exc. GST)
SGD 619.01
(inc. GST)
Per unit
1 +
Related Products
All CBEs have blade terminals and have an ...
All CBEs have blade terminals and have an insulation resistance greater than 100MΩ (MegaOhms). 1-pole magnetic hydraulic CBE with trip free snap action mechanism with toggle actuation.Industry standard dimensions with medium delay for most applications.Typically used on control equipment, communication ...
All switches rated at AC22Auxiliary neutral 25A-36A rear ...
All switches rated at AC22Auxiliary neutral 25A-36A rear mount for door interlocks and boxed isolators, front mount for panel mount isolatorsAuxiliary change over contacts 20A-63A rear mount for door interlock and boxed isolatorsMain Pole contact 25A-63A front mount for panel ...
For use on single-speed single direction motorsSheet steel ...
For use on single-speed single direction motorsSheet steel enclosures, ingress protection to IP65Supplied with 1 x N/O and 1 x N/C auxiliary contact (20A 3 pole one N/O contact only)Lockable in off position with up to three padlocksCover interlocked in ...
Can be used on systems up to 550 ...
Can be used on systems up to 550 VacManufactured from rust protected sheet steelDoor may be removed for ease of installationSwitch can be locked on or off by means of a padlockRed and green switch position indicators.