Eaton 2 Pole Enclosed Non Fused Isolator Switch - 63 A Maximum Current, 22 kW Power Rating, IP65

  • RS Stock No. 393-9737
  • Mfr. Part No. 207238 & T5B-1-102/I4/SVB
  • Manufacturer Eaton
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Insulated Enclosed Padlockable Switch Disconnector

Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits

High impact thermoplastic enclosure to IP65
Built in earth commoning block
Lockable in the OFF position, with up to three padlocks

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Note

Switch power/capacity refers to AC23A use at 380-440V

Approvals

UL and CSA

Standards

IEC (EN60) 947 and IEC (EN60) 204

Specifications
Attribute Value
Number of Poles 2
Maximum Current 63 A
Mounting Type Enclosed
Normal State Configuration NO
Power Rating 22 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 440 V ac
Auxiliary Contacts Available Yes
Electrical Phase 1
Switch Rating 1300 A
Length 240mm
Width 160mm
Depth 125mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +50°C
Handle Colour Red
Terminal Type Screw
4 In stock for delivery within 4 working days
Price Each
SGD 161.71
(exc. GST)
SGD 173.03
(inc. GST)
units
Per unit
1 +
SGD161.71
Related Products
Switch disconnectors are used to isolate electrical equipment ...
Description:
Switch disconnectors are used to isolate electrical equipment before any essential maintenance or repair work can be completed. Switch disconnectors ensure electrical circuits are de-energized safely in accordance with the electricity at work regulations. Engineers and electricians are then able ...
This Professional range of Eaton flush or surface ...
Description:
This Professional range of Eaton flush or surface mounted changeover, Mains, maintenance and Repair switches provides a solution for heavy-duty and industrial applications. These type of switches can sometimes be referred to as a emergency mains switch or emergency button, ...
This Professional range of Eaton flush or surface ...
Description:
This Professional range of Eaton flush or surface mounted changeover, Mains, maintenance and Repair switches provides a solution for heavy-duty and industrial applications. These type of switches can sometimes be referred to as a emergency mains switch or emergency button, ...
Thermoplastic surface mounting enclosure with M25 cable entriesMetric ...
Description:
Thermoplastic surface mounting enclosure with M25 cable entriesMetric cable glands can be fittedIngress protection to IP65 (IP54 with cable fitted)Two or three-position rotary switches: Changeover without OFF, Changeover with OFF, ON/OFFM20 on 20A switches/M25 on 25A and 32A/M20, M25 or ...