Eaton 1 Pole Enclosed Non Fused Isolator Switch - 10 A dc, 20 A ac Maximum Current, 7.5 kW Power Rating, IP65
- RS Stock No. 330-8098
- Mfr. Part No. 207145 & T0-1-8200/I1/SVB
- Manufacturer Eaton
Insulated Enclosed Padlockable Switch Disconnector
Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.
Features & Benefits
High impact thermoplastic enclosure to IP65
Built in earth commoning block
Lockable in the OFF position, with up to three padlocks
What is the difference between a fused switch disconnector and a non-fused switch disconnector?
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.
Note
Switch power/capacity refers to AC23A use at 380-440V
Approvals
UL and CSA
Standards
IEC (EN60) 947 and IEC (EN60) 204
| Attribute | Value |
|---|---|
| Number of Poles | 1 |
| Maximum Current | 10 A dc, 20 A ac |
| Mounting Type | Enclosed |
| Power Rating | 7.5 kW |
| IP Rating | IP65 |
| Accepts Padlocks | Yes |
| Voltage Rating | 240 V dc, 690 V ac |
| Electrical Phase | 1 |
| Switch Rating | 6000 V ac |
| Length | 137mm |
| Width | 80mm |
| Depth | 110mm |
| Terminal Type | Screw |
| Maximum Operating Temperature | +40°C |
| Minimum Operating Temperature | -25°C |
| Handle Colour | Red |
